[SOLVED] No graphs after new install

samapi123 · Post by **samapi123** » Mon Mar 24, 2008 5:19 pm

I Hope this is what do you really want to see.

BSOD2600 · Post by **BSOD2600** » Mon Mar 24, 2008 9:52 pm

yay, debugging logging. Now do you see the difference between what you just posted and the stuff you previously had done?

Since cacti is properly collecting the data, that leaves the problem with something else. Probably NTFS permission rights. make sure the IUSR account and the account running the scheduled task has read/execute permissions on cmd.exe and rrdtool.exe.

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 10:27 am

Thanks. I re-do the permissions and I got the graphs but they are in blank.

What do you think It might be??

BSOD2600 · Post by **BSOD2600** » Tue Mar 25, 2008 10:48 am

Same as before.... turn on graph debugging. whats the error?

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 11:02 am

I try making a new device and the graphs were not made. I run manually php poller.php and it create me the graphs but again there were in blank. All the NTFS permissions are assigned but I don´t know why the graphs are still in blank

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 11:06 am

The result of the graph debugging is this for the graphs in blank.

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 11:38 am

I found that one graph was not made and the debugging gave me this:

BSOD2600 · Post by **BSOD2600** » Tue Mar 25, 2008 12:06 pm

In the case of "SPSSW01 - Traffic - 1:1" everything looks fine. You must wait at least 2 polling cycles for data to appear. Did you do that?

As for "SPSSW01 - SNMP Protocol Statistics" you need to increase the memory and timeout values in your php.ini file. Do you have a slow PC for cacti?

I honestly wouldn't both trying to get special graphs working (like the MIB related ones), until your core cacti installation is functional.

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 12:20 pm

My poller is not working well. Look what it said when I manually run the poller

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 12:35 pm

My computer specifications:

http://forums.cacti.net/download.php?id=12733

Are this specifications slow for cacti?

I waited 2 polling sessions (I run them manually) and the graphs are still in blank.

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 1:19 pm

I Think that the poller is all that is wrong here but I don´t how to fix it because I went through all the steps of the cacti task again and they are all right. How can I fix it??

BSOD2600 · Post by **BSOD2600** » Tue Mar 25, 2008 2:07 pm

You'll get that Poller Interval error if you manually run the poller. It's fine for debugging, but NOT when you're in production.

The windows installation guide has instructions (near the end) on how to properly set up the scheduled task.

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 3:10 pm

Do you think there would be any problem if I delete the scheduled task called cacti and make a new one would affect the configuration of the cacti??

Because I have re-read and re-do the steps of the configuration of the task and the task could never get stated?

samapi123 · Post by **samapi123** » Tue Mar 25, 2008 3:16 pm

Jay I have data in my graphs. The error is the scheduled task. But I don´t now how to fix it. I have manually run the poller and I get some data in the graph

.

How can I get started the scheduled task, I think if I gotted started my cacti will work finally fine.

BSOD2600 · Post by **BSOD2600** » Tue Mar 25, 2008 4:46 pm

samapi123 wrote:How can I get started the scheduled task, I think if I gotted started my cacti will work finally fine.

Did you specify a valid username/password for the cacti scheduled task?

Cacti

[SOLVED] No graphs after new install

Who is online