Multi CPU Utilization Graph

[slech]

what is correct CDEF expression on 16 data source ?

a,b,+,c,+,d,+,e,+,f,+,g,+,h,+,i,+,j,+,ba,+,bb,+,bc,+,bd,+,be,+,bf,+,16,/ ?

[Smux]

Yeah slech, Congratulations!! this yours new templates works fine with me!

Thank you very much!!

[slech]

exploit-soget
Try 16 box cpu

post the rrd log

[skinty]

I've used the last templates that were posted in the 2.4.8.zip earlier a couple of pages back. It works great, but only if you manually select the data sources. It seems that an older version of the script found the correct processors, even though there was nothing descriptive about the names.

Now when I create the graph, the three options are blank and it creates its own data source. I go into the graph, select the correct numbered data sources and later delete the new one that is basically redundant and useless.

What's causing the new data source to be created and how might I adjust the template to reference the new numbered data sources instead?

[slech]

My template don't create any data source.
It's created to the script.
Posible cause is the old template for 4 Cpu box create this data source.

[softex888]

Can anyone tell me why my CPU is not showing here on the graph ??

[slech]

for Linux
CPU usage on 2, 4 and 8 way Linux devices

[argon0]

TBH this is no longer necessary as you can use the agregate function to graph anything with anything else....

[elrond]

ello

I'am comletly newbie;/ Can anybode twll /write what shall i do with dose xmls posted above - i would like to have some nice 2 cpu utlization graphs? Can anybody help?

[elrond]

ello

I've managed to import xmls for 2 cpus but i get nothing or only avereg = 1 . i've checked that no data source is create:

Code: Select all

RRDTool Says:

ERROR: opening '/usr/share/cacti/site/rra/luger_2_cpu_93.rrd': No such file or directory

can anybody help?
[/code]

[elrond]

ello

I've chekecd when graph are creating for some reasons datasources rrd fileas aren't created.

I can create them by hand from - data sources -debag mode there is a code whiche can be run manually and rrd file is creatad ...... is it ok???

But stll even if i create dose missing files my graphs are blank....;/

so i back to square one: can anbody tell how to create cpu utilization graph for two pIII450 on ubuntu???

[rmarinho]

Hi,

I've an dual quadcore cpu wich template should I use, I've try 8 cpu but I getting error:
ERROR: invalid rpn expression in: a,b,+,c,+,d,+,e,+,f,+,g,+,h,+,8,/

Help please.

Regards,

[super-hornet]

Hi,

I've an dual quadcore cpu wich template should I use, I've try 8 cpu but I getting error:
ERROR: invalid rpn expression in: a,b,+,c,+,d,+,e,+,f,+,g,+,h,+,8,/

Help please.

Regards,

8CPU should correct.
Go debug mode and double check on what value it has. Your error message maybe due to:
1. U are not using snmp-5.4 and above for the system u going to monitor.
2. U didn't plot the individual CPU also.
3. Sometime, different system (cacti system) may end up having different value in the a, b, c, d and so on.

SH

[chimpooooo]

Hello!

I wanted to have basic CPU monitoring for a Windows 2003 server. I am using a basic template with the SNMP data input for single CPU having the OID

1.3.6.1.4.1.9600.1.1.5.1.5.1.48

And for average for multi CPU

1.3.6.1.4.1.9600.1.1.5.1.5.6.95.84.111.116.97.108

But the graphs are all empty and i get "WARNING: Result from SNMP not valid. Partial Result" in the logs.

Any help will be greatly appreciated! Thanks

[mill99]

Hello

First, Really Nice Job !!

I'm trying to create a 32 cpu graph template.

Did you have already create it ?