[SOLVED] please help me ,no Linux - Memory Usage

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 4:01 am

os:freebsd 6.2 realease

how can i do? help!!!!!!!!!!!

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 4:13 am

please help ~~~~~~~~~~~~

fmangeant · Post by **fmangeant** » Thu Jan 24, 2008 4:13 am

Hi

this graph templates (and the "Local Linux Machine" host template) is meant to be used on a Linux machine.

To graph a FreeBSD machine, you'll have to use Net-SNMP with the "ucd/net SNMP" host template.

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 4:17 am

but i have change the ucd/net SNMP host template

no data on the Memory Usage too!!

fmangeant · Post by **fmangeant** » Thu Jan 24, 2008 4:35 am

Have you configured Net-SNMP on your FreeBSD host ?

If yes, can you run this command :

Code: Select all

$ snmpwalk -v 1 -c yourcommunity 127.0.0.1 mem

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 5:51 am

i no configure the net-snmp
beacuse i use the ports install net-snmp

this is my os run the command

SDLKM# snmpwalk -v 1 -c yourcommunity 127.0.0.1 mem
Timeout: No Response from 127.0.0.1

how cai i configure the net-snmp?

if you can ,i want to give my cacti use & pass,you can tell me my cacti how many incorrect in it,thx!

fmangeant · Post by **fmangeant** » Thu Jan 24, 2008 5:52 am

You can follow the HowTo in my signature to configure Net-SNMP.

Basically, you can use these lines in snmpd.conf :

Code: Select all

rocommunity public
disk

and then start Net-SNMP.

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 6:22 am

can you add my msn>>?
slkm[ at ]21cn.com

is slkm[ at ]21cn.com

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 6:29 am

i have add

Code: Select all

rocommunity public
disk

in snmpd.conf
and then ?

fmangeant · Post by **fmangeant** » Thu Jan 24, 2008 7:34 am

You then have to start Net-SNMP :

Code: Select all

# /usr/local/etc/rc.d/snmpd.sh start

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 7:41 am

thx~

i have use these command start net-snmp

and then?

fmangeant · Post by **fmangeant** » Thu Jan 24, 2008 7:43 am

Can you try that :

Code: Select all

$ snmpwalk -v 1 -c public 127.0.0.1 sysdescr

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 7:54 am

incorrect

Code: Select all

SDLKM# snmpwalk -v 1 -c public 127.0.0.1 sysdescr
Timeout: No Response from 127.0.0.1

fmangeant · Post by **fmangeant** » Thu Jan 24, 2008 7:59 am

Can you check it's running ?

Code: Select all

$ ps -ef | grep snmpd

BTW, your snmpd.conf is located in /usr/local/share/snmp ?

sdkevin · Post by **sdkevin** » Thu Jan 24, 2008 8:12 am

sorry!!!

my os is not run snmpd

i run

Code: Select all

ps aux

i can't find snmpd

and my rc.conf no about snmpd

and i can't find snmpd.conf

may be i use ports install net-snmp
so no snmpd.conf

but i can see my Graph of my Localhost - Processes & Localhost - Load Average

Cacti

[SOLVED] please help me ,no Linux - Memory Usage

[SOLVED] please help me ,no Linux - Memory Usage

Who is online