Some Graphs Break After Upgrade to Cacti 0.8.7a

[cinergi]

Code: Select all

RRDTool Command:

d:/cacti/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="qblab-camelot - Disk Stats - C:" \
--rigid \
--base=1000 \
--height=160 \
--width=675 \
--upper-limit=100 \
--lower-limit=1 \
--logarithmic \
--vertical-label="Unit (Percent / time slice)" \
--slope-mode \
--font TITLE:12:C:/Windows/Fonts/Arial.ttf \
--font AXIS:8:C:/Windows/Fonts/Cour.ttf \
--font LEGEND:8:C:/Windows/Fonts/Cour.ttf \
--font UNIT:8:C:/Windows/Fonts/Cour.ttf \
DEF:a="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":PercentFreeSpace:LAST \
DEF:b="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":PercentFreeSpace:AVERAGE \
DEF:c="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":FreeMegabytes:AVERAGE \
DEF:d="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":PercentDiskReadTime:LAST \
DEF:e="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":PercentDiskReadTime:AVERAGE \
DEF:f="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":PercentDiskWriteTim:LAST \
DEF:g="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":PercentDiskWriteTim:AVERAGE \
DEF:h="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskReadPerSec:LAST \
DEF:i="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskReadPerSec:AVERAGE \
DEF:j="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskWritePerSec:LAST \
DEF:ba="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskWritePerSec:AVERAGE \
DEF:bb="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskReadQueueLen:LAST \
DEF:bc="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskReadQueueLen:AVERAGE \
DEF:bd="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskWriteQueueLe:LAST \
DEF:be="D\:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd":AvgDiskWriteQueueLe:AVERAGE \
CDEF:cdefc=c,1024,/ \
AREA:a#E8CDEFFF:"Disk Usage\:"  \
GPRINT:a:LAST:"     Free Space\: (%1.1lf %%)"  \
GPRINT:cdefc:LAST:"Available \: %5.2lf Gb\n"  \
AREA:d#8D85F3FF:"Read Time(%)"  \
GPRINT:d:LAST:"    Current\: (%1.1lf %%)"  \
GPRINT:e:AVERAGE:"Average\: (%1.1lf %%)"  \
GPRINT:e:MAX:"Maximum\: (%1.1lf %%)\n"  \
AREA:f#96E78AFF:"Write Time(%)"  \
GPRINT:f:LAST:"   Current\: (%1.1lf %%)"  \
GPRINT:g:AVERAGE:"Average\: (%1.1lf %%)"  \
GPRINT:g:MAX:"Maximum\: (%1.1lf %%)\n"  \
LINE1:h#005199FF:"Disk Reads/sec\:"  \
GPRINT:h:LAST:" Current\:%8.0lf"  \
GPRINT:i:AVERAGE:"Average\:%8.0lf"  \
GPRINT:i:MAX:"Maximum\:%8.0lf\n"  \
LINE1:j#00BF47FF:"Disk Writes/sec\:"  \
GPRINT:j:LAST:"Current\:%8.0lf"  \
GPRINT:ba:AVERAGE:"Average\:%8.0lf"  \
GPRINT:ba:MAX:"Maximum\:%8.0lf\n"  \
LINE1:bb#FF0000FF:"Read Queue\:"  \
GPRINT:bb:LAST:"     Current\:%8.0lf"  \
GPRINT:bc:AVERAGE:"Average\:%8.0lf"  \
GPRINT:bc:MAX:"Maximum\:%8.0lf\n"  \
LINE1:bd#EA8F00FF:"Write Queue\:"  \
GPRINT:bd:LAST:"    Current\:%8.0lf"  \
GPRINT:be:AVERAGE:"Average\:%8.0lf"  \
GPRINT:be:MAX:"Maximum\:%8.0lf\n" 

RRDTool Says:

ERROR: the RRD does not contain an RRA matching the chosen CF

Code: Select all

D:\Program Files (x86)\Net-SNMP\bin>d:\cacti\rrdtool\rrdtool.exe info D:/Cacti/c
acti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd|more
filename = "D:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd"
rrd_version = "0003"
step = 300
last_update = 1199674929
ds[AvgDiskWriteQueueLe].type = "GAUGE"
ds[AvgDiskWriteQueueLe].minimal_heartbeat = 600
ds[AvgDiskWriteQueueLe].min = 0.0000000000e+000
ds[AvgDiskWriteQueueLe].max = 1.0000000000e+002
ds[AvgDiskWriteQueueLe].last_ds = "0"
ds[AvgDiskWriteQueueLe].value = 0.0000000000e+000
ds[AvgDiskWriteQueueLe].unknown_sec = 119
ds[AvgDiskReadQueueLen].type = "GAUGE"
ds[AvgDiskReadQueueLen].minimal_heartbeat = 600
ds[AvgDiskReadQueueLen].min = 0.0000000000e+000
ds[AvgDiskReadQueueLen].max = 1.0000000000e+002
ds[AvgDiskReadQueueLen].last_ds = "0"
ds[AvgDiskReadQueueLen].value = 0.0000000000e+000
ds[AvgDiskReadQueueLen].unknown_sec = 119
ds[PercentFreeSpace].type = "GAUGE"
ds[PercentFreeSpace].minimal_heartbeat = 600
ds[PercentFreeSpace].min = 0.0000000000e+000
ds[PercentFreeSpace].max = 1.0000000000e+002
ds[PercentFreeSpace].last_ds = "20"
ds[PercentFreeSpace].value = 2.0976876000e+002
ds[PercentFreeSpace].unknown_sec = 119
ds[PercentDiskWriteTim].type = "GAUGE"
ds[PercentDiskWriteTim].minimal_heartbeat = 600
ds[PercentDiskWriteTim].min = 0.0000000000e+000
ds[PercentDiskWriteTim].max = 1.0000000000e+002
ds[PercentDiskWriteTim].last_ds = "0"
ds[PercentDiskWriteTim].value = 0.0000000000e+000
ds[PercentDiskWriteTim].unknown_sec = 119
ds[PercentDiskReadTime].type = "GAUGE"
ds[PercentDiskReadTime].minimal_heartbeat = 600
ds[PercentDiskReadTime].min = 0.0000000000e+000
ds[PercentDiskReadTime].max = 1.0000000000e+002
ds[PercentDiskReadTime].last_ds = "0"
ds[PercentDiskReadTime].value = 0.0000000000e+000
ds[PercentDiskReadTime].unknown_sec = 119
ds[AvgDiskReadPerSec].type = "GAUGE"
ds[AvgDiskReadPerSec].minimal_heartbeat = 600
ds[AvgDiskReadPerSec].min = 0.0000000000e+000
ds[AvgDiskReadPerSec].max = NaN
ds[AvgDiskReadPerSec].last_ds = "0"
ds[AvgDiskReadPerSec].value = 0.0000000000e+000
ds[AvgDiskReadPerSec].unknown_sec = 119
ds[AvgDiskWritePerSec].type = "GAUGE"
ds[AvgDiskWritePerSec].minimal_heartbeat = 600
ds[AvgDiskWritePerSec].min = 0.0000000000e+000
ds[AvgDiskWritePerSec].max = NaN
ds[AvgDiskWritePerSec].last_ds = "0"
ds[AvgDiskWritePerSec].value = 0.0000000000e+000
ds[AvgDiskWritePerSec].unknown_sec = 119
ds[FreeMegabytes].type = "GAUGE"
ds[FreeMegabytes].minimal_heartbeat = 600
ds[FreeMegabytes].min = 0.0000000000e+000
ds[FreeMegabytes].max = NaN
ds[FreeMegabytes].last_ds = "1283"
ds[FreeMegabytes].value = 1.3456665954e+004
ds[FreeMegabytes].unknown_sec = 119
rra[0].cf = "AVERAGE"
rra[0].rows = 600
rra[0].pdp_per_row = 1
rra[0].xff = 5.0000000000e-001
rra[0].cdp_prep[0].value = NaN
rra[0].cdp_prep[0].unknown_datapoints = 0
rra[0].cdp_prep[1].value = NaN
rra[0].cdp_prep[1].unknown_datapoints = 0
rra[0].cdp_prep[2].value = NaN
rra[0].cdp_prep[2].unknown_datapoints = 0
rra[0].cdp_prep[3].value = NaN
rra[0].cdp_prep[3].unknown_datapoints = 0
rra[0].cdp_prep[4].value = NaN
rra[0].cdp_prep[4].unknown_datapoints = 0
rra[0].cdp_prep[5].value = NaN
rra[0].cdp_prep[5].unknown_datapoints = 0
rra[0].cdp_prep[6].value = NaN
rra[0].cdp_prep[6].unknown_datapoints = 0
rra[0].cdp_prep[7].value = NaN
rra[0].cdp_prep[7].unknown_datapoints = 0
rra[1].cf = "AVERAGE"
rra[1].rows = 700
rra[1].pdp_per_row = 6
rra[1].xff = 5.0000000000e-001
rra[1].cdp_prep[0].value = NaN
rra[1].cdp_prep[0].unknown_datapoints = 0
rra[1].cdp_prep[1].value = NaN
rra[1].cdp_prep[1].unknown_datapoints = 0
rra[1].cdp_prep[2].value = NaN
rra[1].cdp_prep[2].unknown_datapoints = 0
rra[1].cdp_prep[3].value = NaN
rra[1].cdp_prep[3].unknown_datapoints = 0
rra[1].cdp_prep[4].value = NaN
rra[1].cdp_prep[4].unknown_datapoints = 0
rra[1].cdp_prep[5].value = NaN
rra[1].cdp_prep[5].unknown_datapoints = 0
rra[1].cdp_prep[6].value = NaN
rra[1].cdp_prep[6].unknown_datapoints = 0
rra[1].cdp_prep[7].value = NaN
rra[1].cdp_prep[7].unknown_datapoints = 0
rra[2].cf = "AVERAGE"
rra[2].rows = 775
rra[2].pdp_per_row = 24
rra[2].xff = 5.0000000000e-001
rra[2].cdp_prep[0].value = NaN
rra[2].cdp_prep[0].unknown_datapoints = 12
rra[2].cdp_prep[1].value = NaN
rra[2].cdp_prep[1].unknown_datapoints = 12
rra[2].cdp_prep[2].value = NaN
rra[2].cdp_prep[2].unknown_datapoints = 12
rra[2].cdp_prep[3].value = NaN
rra[2].cdp_prep[3].unknown_datapoints = 12
rra[2].cdp_prep[4].value = NaN
rra[2].cdp_prep[4].unknown_datapoints = 12
rra[2].cdp_prep[5].value = NaN
rra[2].cdp_prep[5].unknown_datapoints = 12
rra[2].cdp_prep[6].value = NaN
rra[2].cdp_prep[6].unknown_datapoints = 12
rra[2].cdp_prep[7].value = NaN
rra[2].cdp_prep[7].unknown_datapoints = 12
rra[3].cf = "AVERAGE"
rra[3].rows = 797
rra[3].pdp_per_row = 288
rra[3].xff = 5.0000000000e-001
rra[3].cdp_prep[0].value = NaN
rra[3].cdp_prep[0].unknown_datapoints = 36
rra[3].cdp_prep[1].value = NaN
rra[3].cdp_prep[1].unknown_datapoints = 36
rra[3].cdp_prep[2].value = NaN
rra[3].cdp_prep[2].unknown_datapoints = 36
rra[3].cdp_prep[3].value = NaN
rra[3].cdp_prep[3].unknown_datapoints = 36
rra[3].cdp_prep[4].value = NaN
rra[3].cdp_prep[4].unknown_datapoints = 36
rra[3].cdp_prep[5].value = NaN
rra[3].cdp_prep[5].unknown_datapoints = 36
rra[3].cdp_prep[6].value = NaN
rra[3].cdp_prep[6].unknown_datapoints = 36
rra[3].cdp_prep[7].value = NaN
rra[3].cdp_prep[7].unknown_datapoints = 36
rra[4].cf = "MAX"
rra[4].rows = 600
rra[4].pdp_per_row = 1
rra[4].xff = 5.0000000000e-001
rra[4].cdp_prep[0].value = NaN
rra[4].cdp_prep[0].unknown_datapoints = 0
rra[4].cdp_prep[1].value = NaN
rra[4].cdp_prep[1].unknown_datapoints = 0
rra[4].cdp_prep[2].value = NaN
rra[4].cdp_prep[2].unknown_datapoints = 0
rra[4].cdp_prep[3].value = NaN
rra[4].cdp_prep[3].unknown_datapoints = 0
rra[4].cdp_prep[4].value = NaN
rra[4].cdp_prep[4].unknown_datapoints = 0
rra[4].cdp_prep[5].value = NaN
rra[4].cdp_prep[5].unknown_datapoints = 0
rra[4].cdp_prep[6].value = NaN
rra[4].cdp_prep[6].unknown_datapoints = 0
rra[4].cdp_prep[7].value = NaN
rra[4].cdp_prep[7].unknown_datapoints = 0
rra[5].cf = "MAX"
rra[5].rows = 700
rra[5].pdp_per_row = 6
rra[5].xff = 5.0000000000e-001
rra[5].cdp_prep[0].value = NaN
rra[5].cdp_prep[0].unknown_datapoints = 0
rra[5].cdp_prep[1].value = NaN
rra[5].cdp_prep[1].unknown_datapoints = 0
rra[5].cdp_prep[2].value = NaN
rra[5].cdp_prep[2].unknown_datapoints = 0
rra[5].cdp_prep[3].value = NaN
rra[5].cdp_prep[3].unknown_datapoints = 0
rra[5].cdp_prep[4].value = NaN
rra[5].cdp_prep[4].unknown_datapoints = 0
rra[5].cdp_prep[5].value = NaN
rra[5].cdp_prep[5].unknown_datapoints = 0
rra[5].cdp_prep[6].value = NaN
rra[5].cdp_prep[6].unknown_datapoints = 0
rra[5].cdp_prep[7].value = NaN
rra[5].cdp_prep[7].unknown_datapoints = 0
rra[6].cf = "MAX"
rra[6].rows = 775
rra[6].pdp_per_row = 24
rra[6].xff = 5.0000000000e-001
rra[6].cdp_prep[0].value = NaN
rra[6].cdp_prep[0].unknown_datapoints = 12
rra[6].cdp_prep[1].value = NaN
rra[6].cdp_prep[1].unknown_datapoints = 12
rra[6].cdp_prep[2].value = NaN
rra[6].cdp_prep[2].unknown_datapoints = 12
rra[6].cdp_prep[3].value = NaN
rra[6].cdp_prep[3].unknown_datapoints = 12
rra[6].cdp_prep[4].value = NaN
rra[6].cdp_prep[4].unknown_datapoints = 12
rra[6].cdp_prep[5].value = NaN
rra[6].cdp_prep[5].unknown_datapoints = 12
rra[6].cdp_prep[6].value = NaN
rra[6].cdp_prep[6].unknown_datapoints = 12
rra[6].cdp_prep[7].value = NaN
rra[6].cdp_prep[7].unknown_datapoints = 12
rra[7].cf = "MAX"
rra[7].rows = 797
rra[7].pdp_per_row = 288
rra[7].xff = 5.0000000000e-001
rra[7].cdp_prep[0].value = NaN
rra[7].cdp_prep[0].unknown_datapoints = 36
rra[7].cdp_prep[1].value = NaN
rra[7].cdp_prep[1].unknown_datapoints = 36
rra[7].cdp_prep[2].value = NaN
rra[7].cdp_prep[2].unknown_datapoints = 36
rra[7].cdp_prep[3].value = NaN
rra[7].cdp_prep[3].unknown_datapoints = 36
rra[7].cdp_prep[4].value = NaN
rra[7].cdp_prep[4].unknown_datapoints = 36
rra[7].cdp_prep[5].value = NaN
rra[7].cdp_prep[5].unknown_datapoints = 36
rra[7].cdp_prep[6].value = NaN
rra[7].cdp_prep[6].unknown_datapoints = 36
rra[7].cdp_prep[7].value = NaN
rra[7].cdp_prep[7].unknown_datapoints = 36

Code: Select all

Data Source Debug

d:/cacti/rrdtool/rrdtool.exe create \
D:/Cacti/cacti/rra/qblab-camelot_avgdiskwritequeuele_33.rrd \
--step 300  \
DS:AvgDiskWriteQueueLe:GAUGE:600:0:100 \
DS:AvgDiskReadQueueLen:GAUGE:600:0:100 \
DS:PercentFreeSpace:GAUGE:600:0:100 \
DS:PercentDiskWriteTim:GAUGE:600:0:100 \
DS:PercentDiskReadTime:GAUGE:600:0:100 \
DS:AvgDiskReadPerSec:GAUGE:600:0:U \
DS:AvgDiskWritePerSec:GAUGE:600:0:U \
DS:FreeMegabytes:GAUGE:600:0:U \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \

Recreating the graph (via data query & graph template; from http://forums.cacti.net/viewtopic.php?p=117181#117181) does not resolve this issue (no LAST CFs are created in the RRD). I'm using the lib/functions.php mentioned in the OP.

Any thoughts or anything I can do to help?
Thanks!

[cinergi]

Note that this happens only if the graph (template in my case) has a LINE/AREA/etc. with a CF of LAST specified. Specifying AVERAGE for those items works fine. I'm still able to specify LAST for other graph types (e.g. GPRINT) without the RRDTOOL command line getting a DEF: line with a LAST in it.

[zorrosam]

please,

after an upgrade from my cacti test installation 0.86j to 0.87a i have problems with some graph.

The graph on localhost, without snmp are ok, instead all the graphs with snmp request are stopped, even the poller and cacti installation are ok.

The debug on one of these give me ok like result.

I have changed the functions.php posted from THE WHITNESS but i have the problem again.

Any other idea?

thanks a lot!!!

zorro

[streaker69]

please,

after an upgrade from my cacti test installation 0.86j to 0.87a i have problems with some graph.

The graph on localhost, without snmp are ok, instead all the graphs with snmp request are stopped, even the poller and cacti installation are ok.

The debug on one of these give me ok like result.

I have changed the functions.php posted from THE WHITNESS but i have the problem again.

Any other idea?

thanks a lot!!!

zorro

I had the exact same problem that I'm currently fighting with. For some reason, SNMP queries just stop after a few hours of polling for no apparent reason.

[zorrosam]

please,

after an upgrade from my cacti test installation 0.86j to 0.87a i have problems with some graph.

The graph on localhost, without snmp are ok, instead all the graphs with snmp request are stopped, even the poller and cacti installation are ok.

The debug on one of these give me ok like result.

I have changed the functions.php posted from THE WHITNESS but i have the problem again.

Any other idea?

thanks a lot!!!

zorro[/img]

under Collection Methods / Data Queries cacti can't find all the xml scripts ... and i don't know why! the path is correct and i haven't changed any permissions!

idea?

[zorrosam]

please,

after an upgrade from my cacti test installation 0.86j to 0.87a i have problems with some graph.

The graph on localhost, without snmp are ok, instead all the graphs with snmp request are stopped, even the poller and cacti installation are ok.

The debug on one of these give me ok like result.

I have changed the functions.php posted from THE WHITNESS but i have the problem again.

Any other idea?

thanks a lot!!!

zorro[/img]

under Collection Methods / Data Queries cacti can't find all the xml scripts ... and i don't know why! the path is correct and i haven't changed any permissions!

idea?

now the permissions are ok but i have the problem with snmp scripts again.

Furthrmore if i run zond i'm able to obtain the data in real time?!

..... great jupiter ...



sam

[marosh123]

please,

after an upgrade from my cacti test installation 0.86j to 0.87a i have problems with some graph.

The graph on localhost, without snmp are ok, instead all the graphs with snmp request are stopped, even the poller and cacti installation are ok.

The debug on one of these give me ok like result.

I have changed the functions.php posted from THE WHITNESS but i have the problem again.

Any other idea?

thanks a lot!!!

zorro[/img]

under Collection Methods / Data Queries cacti can't find all the xml scripts ... and i don't know why! the path is correct and i haven't changed any permissions!

idea?

now the permissions are ok but i have the problem with snmp scripts again.

Furthrmore if i run zond i'm able to obtain the data in real time?!

..... great jupiter ...



sam

Hi All,

the same problem here.
Cacti installed from BSOD's full-install_cacti-0.8.7a.1.7.exe
My test PC config:

Cacti Version - 0.8.7a
Plugin Architecture - 1.4
Poller Type - CMD.php
Server Info - Windows NT 5.0
Web Server - Microsoft-IIS/5.0
PHP - 5.2.5
MySQL - 5.0.45-community-nt
RRDTool - 1.2.15
SNMP - snmpwalk [OPTIONS] AGENT [OID]
Version: 5.4.1
Plugins

• Thresholds (thold - v0.3.9)
  Update Checker (update - v0.4)
  Device Monitoring (monitor - v0.8.2)
  Network Tools (tools - v0.2)
  Host Info (hostinfo - v0.2)
  Configuration manager (configmanager - v0.75)
  Global Plugin Settings (settings - v0.3)
  Large Site Performane Booster for Cacti (boost - v1.6)
  ReportIt (ReportIt - v0.5.1)
  Dataquery (dataquery - v0.1.2a)
  killspike (killspike - v0.1.0a)
  Poller Performance Report (pollperf - v0.32)
  Create Aggregate Graphs (aggregate - v0.64)
  Real-time statistics (zond - v0.34)

The Spine is not working at all ( SegFault error) so I run cmd.php.
After patch and some plugins I got the "Undefined index... on line 1632" error, but all exept zond is running. So I leave the PC for a while to collect some data. Now as you can see from the picture I could not get graph.
There is no error in debug level of cacti.log, no error in rrd and no error in "Verbose query" of device data collection.
But the Zond is working

1 positive, when I replace my patched version of function.php with those from cacti-0.8.7a.zip I resolve the "Undefined index..." error.

Sorry for my poor English.
Have a nice day/night

[marosh123]

under Collection Methods / Data Queries cacti can't find all the xml scripts ... and i don't know why! the path is correct and i haven't changed any permissions!

idea?

now the permissions are ok but i have the problem with snmp scripts again.

Furthrmore if i run zond i'm able to obtain the data in real time?!

..... great jupiter ...



sam

Hi All,

the same problem here.
Cacti installed from BSOD's full-install_cacti-0.8.7a.1.7.exe
My test PC config:

Cacti Version - 0.8.7a
Plugin Architecture - 1.4
Poller Type - CMD.php
Server Info - Windows NT 5.0
Web Server - Microsoft-IIS/5.0
PHP - 5.2.5
MySQL - 5.0.45-community-nt
RRDTool - 1.2.15
SNMP - snmpwalk [OPTIONS] AGENT [OID]
Version: 5.4.1
Plugins

• Thresholds (thold - v0.3.9)
  Update Checker (update - v0.4)
  Device Monitoring (monitor - v0.8.2)
  Network Tools (tools - v0.2)
  Host Info (hostinfo - v0.2)
  Configuration manager (configmanager - v0.75)
  Global Plugin Settings (settings - v0.3)
  Large Site Performane Booster for Cacti (boost - v1.6)
  ReportIt (ReportIt - v0.5.1)
  Dataquery (dataquery - v0.1.2a)
  killspike (killspike - v0.1.0a)
  Poller Performance Report (pollperf - v0.32)
  Create Aggregate Graphs (aggregate - v0.64)
  Real-time statistics (zond - v0.34)

The Spine is not working at all ( SegFault error) so I run cmd.php.
After patch and some plugins I got the "Undefined index... on line 1632" error, but all exept zond is running. So I leave the PC for a while to collect some data. Now as you can see from the picture I could not get graph.
There is no error in debug level of cacti.log, no error in rrd and no error in "Verbose query" of device data collection.
But the Zond is working

1 positive, when I replace my patched version of function.php with those from cacti-0.8.7a.zip I resolve the "Undefined index..." error.

Sorry for my poor English.
Have a nice day/night

I know what you think
No graph is because the boost plugin.
So I write some // in global.php and all is running.
Bye[/b]