Windows All-In-One Installer [Cacti 1.2.24] [Updated 2023-03-09]

BSOD2600 · Post by **BSOD2600** » Wed Nov 14, 2007 2:08 pm

The installer installs 32bit versions of everything. So it might work, but hard to say since I don't have a 64bit installation to do testing.

leeloob · Post by **leeloob** » Thu Nov 15, 2007 3:32 am

BSOD2600 wrote:The installer installs 32bit versions of everything. So it might work, but hard to say since I don't have a 64bit installation to do testing.

It works on 64bit Windows 2003 Server

BSOD2600 · Post by **BSOD2600** » Thu Nov 15, 2007 2:14 pm

While 32bit versions might work, IMO it'd be better to be using the 64bit versions...

foreignmedia · Post by **foreignmedia** » Wed Dec 05, 2007 10:32 am

I used the installer to instal cacti, GREAT GREAT work!

But now I want to update to the most recent version is there a 'how to' for this?

Thanx

BSOD2600 · Post by **BSOD2600** » Wed Dec 05, 2007 2:47 pm

http://www.cacti.net/downloads/docs/html/upgrade.html

foreignmedia · Post by **foreignmedia** » Thu Dec 06, 2007 7:29 am

Thanx! Didn't know it was that simple for windows also.

denis.king · Post by **denis.king** » Fri Dec 07, 2007 12:03 pm

As the installer gets to files in the Windows/systems32 directory, I keep getting

"Error opening file for writing"

msvcr71.dll

Any ideas?

The file does exist and is not set as read only. I suspect something else is using the file, but I don't know what as I have no apps running.

DK

BSOD2600 · Post by **BSOD2600** » Fri Dec 07, 2007 5:56 pm

You can ignore the error.

denis.king · Post by **denis.king** » Sat Dec 08, 2007 8:03 am

When I go to the cacti URL, I get this HTTP 500 error. There are a few sub codes for an HTTP 500 error code, but not sure which one it is.

I am starting to think that my IIS version is not version 6, but I can't seem to be able to verify the version of IIS. It does not say in the service manager OR the installd window components in the control pannel.

When IIS6 is installed, is it actually called IIS6 in the service manager? because I only have IIS there as the title?

Otherwise, any other idea's why the standard newbie would get the HTTP 500 error.

Thanks

denis.king · Post by **denis.king** » Sat Dec 08, 2007 8:23 am

I found your old posting on this topic.

I read through http://support.microsoft.com/kb/321013 and found that .pl and .plx extensions are not in my IIS installation. Therefore, this is not the problem for me.

Thanks

BSOD2600 · Post by **BSOD2600** » Sat Dec 08, 2007 10:54 pm

Verify the .php extensions are correct in IIS. Read my installation guide in my signature for the PHP and IIS portions.

BSOD2600 · Post by **BSOD2600** » Tue Dec 18, 2007 4:39 am

Updated the installer with Cacti 0.8.7a and Spine.

krap_rz · Post by **krap_rz** » Tue Jan 08, 2008 4:45 am

Hi Bsod,

Just want to asked regarding the new version 1.7. If i were to make the polling time = 4 minutes, do i need to change the default value of heartbeat? If i do, then what the value? (polling = 4min = hrtbeat = 240)???

Please advice

BSOD2600 · Post by **BSOD2600** » Tue Jan 08, 2008 3:12 pm

I believe you would, but not entirely sure. Post your question in the general forum. It's a generic Cacti 0.8.7a thing; not something related to my installer.

xtian · Post by **xtian** » Mon Jan 14, 2008 2:20 pm

Hi!

First of all, thanks for a great installer, really.

Now to my problem. After a fresh install on Win2k3 Server with IIS6 i aint getting any graphs (read: picture) and a SNMP Error. What can cause this issue?

Cacti

Windows All-In-One Installer [Cacti 1.2.24] [Updated 2023-03-09]

msvcr71.dll

HTTP 500 Error

HTTP 500 Error

Who is online