Cisco 7200 oid gatekeeper calls

[ilmioprofilocacti]

Hi,
I am looking for a way to count the number of "gatekeeper calls" who are connected to my cisco router.
I would appreciate it very much if someone could help me.

tks_

[jay]

Not sure if this helps you

http://forums.cacti.net/about10769.html

I don't use gatekeeper so can't comment on oids to use etc. Sure it will be a case of finding the oids that you need and deciding whether you need to walk an index or just plot the relevant oids into a graph. If you need to walk and index you will need a data query.

Jay

[ilmioprofilocacti]

I need something about " show gatekeeper calls" Cisco command.
TKS

[jay]

Check out for your MIB
http://www.oidview.com/mibs/9/CISCO-GATEKEEPER-MIB.html

Then look for the OIDS that you need and create the templates from there. I don't use gatekeeper so don't know the output of the command you are after.

This may be what you are looking for in the MIB

cgkLocalZoneTable cgkLocalZoneTable 1.3.6.1.4.1.9.10.40.1.1.3 OBJECT
cgkLocalZoneEntry cgkLocalZoneEntry 1.3.6.1.4.1.9.10.40.1.1.3.1 OBJECT
cgkLZoneACFs cgkLZoneACFs 1.3.6.1.4.1.9.10.40.1.1.3.1.1 OBJECT
cgkLZoneTotalConcurrentCalls cgkLZoneTotalConcurrentCalls 1.3.6.1.4.1.9.10.40.1.1.3.1.10 OBJECT
cgkLZoneARJs cgkLZoneARJs 1.3.6.1.4.1.9.10.40.1.1.3.1.2 OBJECT
cgkLZoneTotalBandwidth cgkLZoneTotalBandwidth 1.3.6.1.4.1.9.10.40.1.1.3.1.3 OBJECT
cgkLZoneAllocTotalBandwidth cgkLZoneAllocTotalBandwidth 1.3.6.1.4.1.9.10.40.1.1.3.1.4 OBJECT
cgkLZoneInterzoneBandwidth cgkLZoneInterzoneBandwidth 1.3.6.1.4.1.9.10.40.1.1.3.1.5 OBJECT
cgkLZoneAllocInterzoneBandwidth cgkLZoneAllocInterzoneBandwidth 1.3.6.1.4.1.9.10.40.1.1.3.1.6 OBJECT
cgkLZoneSessionBandwidth cgkLZoneSessionBandwidth 1.3.6.1.4.1.9.10.40.1.1.3.1.7 OBJECT
cgkLZoneProxiedCall cgkLZoneProxiedCall 1.3.6.1.4.1.9.10.40.1.1.3.1.8 OBJECT
cgkLZoneProxiedCallBits cgkLZoneProxiedCallBits 1.3.6.1.4.1.9.10.40.1.1.3.1.9 OBJECT

Jay

[ilmioprofilocacti]

ths a lot!
I found yours info very useful!!

bye bye