Report plugin ''ReportIt" - v0.7.5a (released 23/12/11)

[africanw]

Hi,

Not yet lol. I added the other graphs to show that I was getting the wrong results back from reportit.

What I am trying to do is get the total in or out bytes for an interface for a certain period like last month.

Sorry if I am been thick.

[africanw]

Am starting to wonder if it is not related to this problem I have reported -

http://forums.cacti.net/viewtopic.php?t ... highlight=

Because if I click on the graph generate by reportit it gets the same problem.

[browniebraun]

It seems so. I've checked it again with simular settings without any differences.
BTW for faster reporting you can use the php bindings for rrdtool, which can be found under the "links" link in my signature.

Best regards
-Andreas-

[africanw]

Yeah am using them on the Windows and Linux box's. Takes around 0ms to 1ms to run .

[nduda78]

...but I want to generate a traffic report with displays percentage. Is that possible?

How can I write a report that will give results in percentage? Like is there is 4mb outbound being used on a 6mb circuit, i want the result to show for current/min 60% instead of 4mb

[ddonohue]

post removed b/c i suffer from stupidity at times..


Thanks,

Donohue

[chrisgapske]

When I look at your example.

http://forums.cacti.net/viewtopic.php?p ... ght=#96475

I am not able to save the Calculation Formula for Treshold.

[browniebraun]

"c1v" for example is the internal name for a variable. After you've created a new one every user can define an individual value for it in his own report configuration depending on that template. So, at first you've to declare it and after that you can use it in your formula. You don't have to define separate report templates for e.g 75%, 85% and so on.
That makes it more flexible.


Best regards
-Andreas-

[atoonk]

Hi All,

I've been testing the reportit plugin and it seems to do exactly what I want. Thanks!
Just a question, the amount of data seems to be represented in in Ti, Gi, Mi and Ki. for example:
36.09 Gi
3.42 Mi
Also see screensshot.

Is this a configuration issue?
any help would be appreciated.

Thanks, Andree

[gandalf]

These are SI metrics
Reinhard

[atoonk]

Thanks!
I changed it to Decimal SI-Prefix.

Cheers, Andree

[atoonk]

Hi,

I would like to create a report which shows the sum of multiple interfaces ( multiple rrds).
In this case we have 3 upstream transit ISP's which i know report individually. However I would also like to see the total transit traffic.

for example:
transit ISP1 total-in=100GB total-out=133GB
transit ISP2 total-in=16GB total-out=33GB
transit ISP3 total-in=10GB total-out=1GB

#below is what i want:
Total: total-in=126GB total-out=167GB

Can I do this? If so can you explain me how?

Thanks, Andree

[atoonk]

maybe this is some relevant extra info. I do have a graph doing this. So the graph represents the aggregated traffic of the 3 upstreams.
That's done like described in this post:
http://forums.cacti.net/post-84968.html

can I somehow reuse that?

Thanks, Andree

Code: Select all

/opt/csw/bin/rrdtool graph - \
--imgformat=PNG \
--start=1193682785 \
--end=1193768885 \
--title="Total Transit " \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
COMMENT:"From 2007/10/29 11\:33\:05 To 2007/10/30 11\:28\:05\c" \
COMMENT:"  \n" \
--vertical-label="bits  per second" \
--slope-mode \
DEF:a="/usr/local/apache/htdocs/cacti/rra/policy1xxx_traffic_in_607.rrd":traffic_in:AVERAGE \
DEF:b="/usr/local/apache/htdocs/cacti/rra/policy1xxx_traffic_in_608.rrd":traffic_in:AVERAGE \
DEF:c="/usr/local/apache/htdocs/cacti/rra/policy1xxx_traffic_in_609.rrd":traffic_in:AVERAGE \
DEF:d="/usr/local/apache/htdocs/cacti/rra/policy1xxx.traffic_in_607.rrd":traffic_out:AVERAGE \
DEF:e="/usr/local/apache/htdocs/cacti/rra/policy1xxx.traffic_in_608.rrd":traffic_out:AVERAGE \
DEF:f="/usr/local/apache/htdocs/cacti/rra/policy1xxx.traffic_in_609.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefb=b,8,* \
CDEF:cdefc=c,8,* \
CDEF:cdefd=a,b,+,c,+,8,* \
CDEF:cdefh=d,8,* \
CDEF:cdefi=e,8,* \
CDEF:cdefj=f,8,* \
CDEF:cdefba=d,e,+,f,+,8,* \
AREA:cdefa#6EA100:""  \
AREA:cdefb#6EA100:"":STACK \
AREA:cdefc#6EA100:"":STACK \
AREA:cdefd#6EA100:"Inbound"  \
GPRINT:cdefd:LAST:"Current\:%8.2lf %s"  \
GPRINT:cdefd:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefd:MAX:"Maximum\:%8.2lf %s\n"  \
LINE1:cdefh:""  \
LINE1:cdefi:"":STACK \
LINE1:cdefj:"":STACK \
LINE1:cdefba#4444FF:"Outbound"  \
GPRINT:cdefba:LAST:"Current\:%8.2lf %s"  \
GPRINT:cdefba:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefba:MAX:"Maximum\:%8.2lf %s\n"

[browniebraun]

Hi Andree,

I've to let you down, but the calculation algorithm does not support that. ReportIt supports only a set of calculations per data item (e.g one interface, cpu etc.). Therefore it uses data sources not graphs.
BTW you have a nice homepage with an interesting CV.

Best regards
-Andreas-

[atoonk]

hi Andreas,

Thanks for your quick reply. I guess I will need to find a way to do it myself then
Maybe you can consider this as a feature request?

Glad you like my homepage
Thanks again,
Andree