After upgrade to 0.8.7 SNMP - disk graphs are empty

[Beaujolais]

OK, thank you.

That fix made the errors go away, but the disk graphs are still empty. The graphs are being created with, but no chars ..zero values for everything.

The applied fix

Code: Select all

        $scratch = cacti_snmp_get($snmp_hostname,
                $snmp_community,
                ($oid[0][1] . "." . $cacti_request_index),
                $snmp_version,
                $snmp_username,
                $snmp_password,
                "",
                "",
                "",
                "",
                $snmp_port,
                $snmp_timeout);

[TheWitness]

Please post your DEBUG pass for this. Also, run from the command line and show me the output. Do you know how to run the script server in debug mode?

TheWitness

[Beaujolais]

Do you know how to run the script server in debug mode?

Please advise, I'm reaching my limits here

[TheWitness]

http://forums.cacti.net/viewtopic.php?t=7738

TheWitness

[TheWitness]

Oh, one other thing, make sure you also perform the following:

1) Copy the original <path_cacti>/resource/script_server from the installation tarball to your installation
2) Repopulate your poller cache

I have double audited the script and it looks fine. So, it must be that your poller cache is not in line with the structure of the script. Although, I have been wrong before.

BTB, even with this bug, my graphs never stopped. However, the script should be updated regardless.

TheWitness

[Beaujolais]

Here it is, hopefully I've done it right.
Mind, I've replaced ss_host_disk from this thread already http://forums.cacti.net/viewtopic.php?t=23925 ...should I put back the original one?

I've replaced the script_server dir from tarball as advised.
To repopulate the poller cache I assume you mean System Utilities -> Rebuild Poller Cache ...I did that too.


Here is the output:

Code: Select all

 # php ./script_server.php
PHP Script Server has Started - Parent is cmd
/srv/www/htdocs/cacti/scripts/ss_host_disk.php ss_host_disk 192.168.10.2 5 2:161:500:public:::::: get total 31
0

[TheWitness]

I am concerned about "get total 31". Please reindex the host and see if this is still 31. Do you have that many disks?

TheWitness

[Beaujolais]

No, there are 3 disks with some 3 or 4 partitions each.

How would I re-index the host?

[TheWitness]

Click the green circle when editing the host.

TheWitness

[Beaujolais]

Still 31 for the / partition.

I'm going to re-install from scratch and re-create everything and verify after each step so see where it fracks up!

Thanks for your help, I really appreciate it.