No graph for new devices

Post support questions that directly relate to Linux/Unix operating systems.

Moderators: Developers, Moderators

Post Reply
shanz
Posts: 12
Joined: Mon Sep 10, 2007 2:32 am

No graph for new devices

Post by shanz »

Hi,
I tried to install plugin Arc. but got some errors and graph was not geting updated then I removed all new files and put the old files of version 0.8.6j. It is updating graph.
But Now when I have added two new devices it is not generating graph for this new devices.
When I checked with php -q poller.php I got many OKs and the following
"09/10/2007 10:54:09 AM - SYSTEM STATS: Time:27.4693 Method:cmd.php Processes:1 Threads:N/A Hosts:12 HostsPerProcess:12 DataSources:363 RRDsProcessed:194"

and from the web for one interface

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="IBM Rack 1 - Traffic - Fa12" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
DEF:a="/var/www/html/cacti/rra/ibm_rack_1_traffic_in_952.rrd":traffic_in:MAX \
DEF:b="/var/www/html/cacti/rra/ibm_rack_1_traffic_in_952.rrd":traffic_in:AVERAGE \
DEF:c="/var/www/html/cacti/rra/ibm_rack_1_traffic_in_952.rrd":traffic_out:MAX \
DEF:d="/var/www/html/cacti/rra/ibm_rack_1_traffic_in_952.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefb=b,8,* \
CDEF:cdefe=c,8,* \
CDEF:cdeff=d,8,* \
CDEF:cdefi=a,UN,INF,UNKN,IF \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefb:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefb:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
GPRINT:cdeff:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s" \
AREA:cdefi#8F9286:""
RRDTool Says:

ERROR: opening '/var/www/html/cacti/rra/ibm_rack_1_traffic_in_952.rrd': No such file or directory



Can anybody help me out pls?
Thanks in advance
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Post by gandalf »

This occurs most often if the target device is detected as down. In this case, cacti will not poll the device until it reappears as up
Reinhard
shanz
Posts: 12
Joined: Mon Sep 10, 2007 2:32 am

Post by shanz »

The devices is up as it is reading with cricket. I m planning to remove cricket and put all the devices on cacti.

One thing i notice is that when I select any interface to monitor, the selected infterface colour is not changing to yellow as this has happed to old devices.
There is no rrd files creation for new devices. I checked the ownership for rra and log folder it for cacti user.

Thanks
shanz
Posts: 12
Joined: Mon Sep 10, 2007 2:32 am

Post by shanz »

I applied few plugins like monitor, tools, update, all are working fine with all the old devices. but it is not generating graph for the newly added devices. I am getting broken link for the new devices. and still no luck with rrd files
RRDTool Says:

ERROR: opening '/var/www/html/cacti/rra/gw_dam_rtr_traffic_in_1056.rrd': No such file or directory

Pls help.
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Post by gandalf »

Would it be an option to do a fresh install of the code only? Keep the database and save the ./include/config.php!
Reinhard
shanz
Posts: 12
Joined: Mon Sep 10, 2007 2:32 am

Post by shanz »

Do you suggest me to remove all /var/www/html/cacti files and upload new cacti files again ? and then restore config.php file?
If i do so then history, plugin arct. and plugins will work?

I stuck on this. It will be a great help.
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Post by gandalf »

shanz wrote:Do you suggest me to remove all /var/www/html/cacti files and upload new cacti files again ? and then restore config.php file?
If i do so then history, plugin arct. and plugins will work?
As long as you do not delete the running database and do not delete the rra folder, this will work
Reinhard
ddbtek
Posts: 1
Joined: Sat Sep 15, 2007 4:23 pm

long-time cacti bug, new devices not graphing

Post by ddbtek »

Hello,

I'm running cacti 0.8.6c and it has been awesome but after using for about 4-5 months it quit creating graphs when I would add new devices. Took me a little while to figure it out and I hadn't seen it solved anywhere else. I apologize if it is in the forum but I couldn't find it and it may solve other people's problems:

I wasn't getting a graph so I turned on graph debugging and saw:

Code: Select all

RRDTool Says:

ERROR: opening '/home/www/htdocs/cacti-0.8.6c/rra/netapp_3020c_sannas_traffic_in_883.rrd': No such file or directory
So now what--- :)... Finally figured out where to see what code was being generated:

Code: Select all

Data Source Debug

/usr/local/rrdtool-1.0.48/bin/rrdtool create \
/home/www/htdocs/cacti-0.8.6c/rra/netapp_3020c_sannas_traffic_in_882.rrd \
--step 300  \
DS:traffic_out:COUNTER:600:0:100000000 \
DS:traffic_in:COUNTER:600:0:100000000 \
DS:traffic_out:COUNTER:600:0:100000000 \
DS:traffic_in:COUNTER:600:0:100000000 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \
Notice how it created the second set of DS: lines (above)? RRDTOOL doesn't like this and so doesn't do anything. If you eliminate them and run them in your console the rrdtool file is created and then cacti works.

If you change the data source or the graph info you'll have to do it again.

So in summary:

1) go to 'Data Sources' section
2) select the data source with 'Interface - Traffic' template
3) 'Turn On Data Source Debug Mode.'
4) copy the script to create the rrdtool database
5) delete the DS duplicated lines. ( not all DS )
6) execute de clean script in your console.
7) remenber to associate this .rrd file to a cacti user.


If you are having similar problems see if you can run the rrdtool script directly to see what rrdtool does/says.

cheers,
David
shanz
Posts: 12
Joined: Mon Sep 10, 2007 2:32 am

Post by shanz »

Well, I believe its all happened after importing bluecoat xml file from the forum.
I removed all files and kept the same database, it did not work
then I removed the database and uploaded the new one. Everything starts working and I was able to add new devices. But when I imported the file cacti_host_template_bluecoat_proxy1.xml for bluecoat. All the same problem again, not able to add new devices.

How can I fix the Interface - Traffic Tamplate?

Pls save me from deleting the database and doing it from the begning.

Thanks
shanz
Posts: 12
Joined: Mon Sep 10, 2007 2:32 am

Post by shanz »

David,
I did all the 7 steps Its showing me NAN value.

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="IBM_Rack 4 - Traffic - Fa10" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
DEF:a="/var/www/html/cacti/rra/ibm_rack_4_traffic_in_128.rrd":traffic_in:AVERAGE \
DEF:b="/var/www/html/cacti/rra/ibm_rack_4_traffic_in_128.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf%s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf%s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf%s\n" \
LINE1:cdefe#002A97:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf%s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf%s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf%s"
RRDTool Says:

OK

Did i missed something? Thanks.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest