snmp OID not collectable

[silgan24]

I've a problem with an OID for an Cisco ITP Switch which accumulates cs7 Interface Traffic (Packets).

here is the snmpwalk:

Code: Select all

snmpwalk -v2c -c <community> <host_address> .1.3.6.1.4.1.9.9.333.1.1.1.1.6.16.76.111.103.105.99.97.67.77.71.32.83.83.55.111.73.80.1.11.76.83.78.48.73.84.80.68.85.83.50.10336.10337.3

the result:

Code: Select all

SNMPv2-SMI::enterprises.9.9.333.1.1.1.1.6.16.76.111.103.105.99.97.67.77.71.32.83.83.55.111.73.80.1.11.76.83.78.48.73.84.80.68.85.83.50.10336.10337.3 = Counter32: 19975526

for me the snmp works correct and the OID is accessable.

but the RRDTOOL says:

Code: Select all

1187782500: nan
1187782800: nan
1187783100: nan
1187783400: nan

in the cacti.log there is this entry:

Code: Select all

08/22/2007 01:11:27 PM - CMDPHP: Poller[0] Host[14] DS[791] WARNING: Result from SNMP not valid.  Partial Result: No Such Instance cur
08/22/2007 01:11:27 PM - CMDPHP: Poller[0] Host[14] DS[791] SNMP: v2: ideo214, dsname: cgactMtp3InPackets, oid: .1.3.6.1.4.1.9.9.333.1.1.1.1.6.16.76.111.103.105.99.97.67.77.71.32.83.83.55.111.73.80.1.11.76.83.78.48.73.84.80.68.85.83.50.10336.10337.3, output: U

i tried many thing to solve this problem.
Maybe somebody knows what i can do.

[/code]

[gandalf]

Some time ago, cacti had a limitation on the usable length of SNMP OIDs. Yours is quite huge. Please tell us, waht cacti version you are currently running
Reinhard

[silgan24]

I tried it with version 0.8.6i first, then i updatet it and now i have version 0.8.6j but still not working

[gandalf]

Please select "System Utilities -> View SNMP Cache". Filter for your host and compare the OID to your original one. Is it truncated?
Reinhard

[silgan24]

I couldn't find the OID in the SNMP Cache but i found it in the POLLER Cache:

Code: Select all

 SNMP Version: 2, Community: public, OID: .1.3.6.1.4.1.9.9.333.1.1.1.1.6.16.76.111.103.105.99.97.67.77.71.32.83.83.55.111.73.80.1.11.76.83.78.48.73.84.80.68.85.83.50.10336.10337.3
	RRD: /usr/share/cacti/site/rra/itpdus1_10_30_30_50_cgactmtp3inpackets_TEST_802.rrd

and the OID is not truncated!

Maybe there exists a problem with "10336.10337" in the OID. It describes the Operation Point Code (OPC) and Destination Point Code (DPC). Is it not allowed that they are longer than 3 characters?


Elmar

[gandalf]

Maybe there exists a problem with "10336.10337" in the OID. It describes the Operation Point Code (OPC) and Destination Point Code (DPC). Is it not allowed that they are longer than 3 characters?

There's no limitation of that kind for parts of an OID. Did you follow second link of my signature to track that issue down?
Reinhard

[bigear]

I am using cacti version J. I am able to create graphs for my edge switch with Generic SNMP-enabled Host. Just wondering how do I create a graph by a SNMP oid? I did select "System Utilities -> View SNMP Cache". Filter for my host and use that OID for that particular device. Then I just follow the steps from gandalf on createing graph by SNMP OIDs. How come there is no data showing? any help is appreciated. Thanks.

[gandalf]

The screenshot from Graph management does not help at this point. Please revise the second link of my signature to find the OID snmpget in cacti.log. Please post findings step-by-step
Reinhard