HELP: A Few Different Issues

av8orjon · Post by **av8orjon** » Fri Aug 10, 2007 12:39 pm

BANG!!

I have graphs.....pretty pictures everywhere!!!

What a difference a switch from a one to a zero makes!

Here's the setting...

To check what mode my system is in I ran

cat /selinux/enforce

I ensured that it was not enforcing, ie passive mode using the setenforce command

Code: Select all

setenforce 0

and VOILA! Graphs are now populating!

Without your help I would have been truly stuck!! Thanks so much

JON

Post by **gandalf** » Fri Aug 10, 2007 12:57 pm

You're welcome
Reinhard

dinux · Post by **dinux** » Sat Aug 11, 2007 12:11 am

Fabulous that his issue is fixed but mine still isn't. Does anyone have any ideas? Also, I just got my NFS installed tonight and setup on Cacti. Is there a cap limit on the graphs or something? The box has 1.5TB of space available and 1.6TB total but my graph only shows 60GB. Any ideas?

Post by **gandalf** » Sat Aug 11, 2007 12:18 pm

For the space issue, please refer to the second link of my signature to find the results of polling in the log. You will see the command cacti uses for polling (in case of SNMP you will see at least the OID). This way, you should be able to run the same command from command line to verify correct results
Reinhard

Post by **TheWitness** » Sat Aug 11, 2007 7:22 pm

Wow, like three separate post's in one. Touche!

TheWitness

dinux · Post by **dinux** » Mon Aug 13, 2007 12:33 am

Ok, well seeing how all of my servers have more than 60GB of space but they are all reporting 60GB in their respective graphs, I have come to the conclusion that there is some limit. Either SNMPv1 or cacti somehow.

Ping Latency still isn't working though.

Post by **gandalf** » Mon Aug 13, 2007 5:50 am

dinux wrote:Ok, well seeing how all of my servers have more than 60GB of space but they are all reporting 60GB in their respective graphs, I have come to the conclusion that there is some limit. Either SNMPv1 or cacti somehow.

Ping Latency still isn't working though.

Well, I'd really like to help you. But your replay is not an answer to my query from above:

For the space issue, please refer to the second link of my signature to find the results of polling in the log. You will see the command cacti uses for polling (in case of SNMP you will see at least the OID). This way, you should be able to run the same command from command line to verify correct results

Reinhard

HELP: A Few Different Issues

Who is online