Cacti 0.8.6k Beta 2 Available for Testing

[rony]

Available now, Cacti 0.8.6k Beta 2 for TESTING!

Do not use this in your production environment!

Highlighted changes:

• 1 Minute Polling interval support
• Web Basic Authentication
• Updates to interface for a consistence presentation

Change log:

0.8.6k
-bug#0000480: error when making a change to graphs displayed per page
-bug#0000833: favicon.ico support
-bug#0000850: Select All for list view
-bug#0000873: Poller hangs in certain situations
-bug#0000876: Ability to search for host with a not UP status
-bug#0000898: Selecting a CUSTOM timespan and then CLEARing yields "LAST HALF HOUR" preset
-bug#0000899: Settings checks paths for existance
-bug#0000902: cmd.php doesn't work with PHP 4.4.1 under windows
-bug#0000903: snmpgetnext function does not exist in PHP less than 5.0
-bug#0000904: Data Source creation fails without php-snmp
-bug#0000906: Every tenth host does not show on tree during console edit
-bug#0000907: Sorting of data sources when interface numbers are used without leading zeros are incorrectly sorted
-bug#0000908: Graphs created by SNMP data queries are losing their specific names if the template is modified
-bug#0000910: Cacti complains when trying to set the data source "maximum value" to any number with a decimal point
-bug#0000912: Nth Percentile thumbnail graphs fail with RRDtool 1.2.15, 1.2.18
-bug#0000913: Allow direct linking to specific graph pages
-bug#0000919: Problem with ping_tcp function in 8.6j and possible fix.
-bug#0000920: Improved handling of rrdtool --font parameter
-bug#0000921: Improvement to ping.pl script
-bug#0000925: Support for host_* variables in the legend
-bug#0000927: Classic export does not recognize thumbnail columns properly
-bug#0000931: New rrdtool fails on empty comment
-bug#0000934: Column 'status_last_error' in table 'host' too short.
-bug#0000937: System output in hosts.php poor for Alcatel
-bug#0000946: Timetick of zero returns down for device
-bug#0000953: SNMP Passphrase displayed in cleartext
-bug#0000955: Fixed possible denial of service attack by modifying graph image url
-bug#0000956: Patch for tree management
-bug#0000957: Script server output's beginning/trailing data during "Include" causing a synchronization issue
-bug#0000958: Slope Mode is now selectable
-bug#0000959: Alarming added when poller output table is not empty
-bug#0000963: TCP/UDP capitalization
-bug#0000965: When setting filters under utilities, pressing enter takes you back to the main page
-bug#0000966: Log file viewing utility has no ability to filter
-bug#0000969: In some versions of PHP, the graph tree will not view properly
-bug#0000970: Incorrect debug messages in lib/ping.php for failed UDP ping
-bug#0000982: Remove invalid references to the "output_string" column in the "data_input" table
-bug#0000983: Bad SQL: snmp_query_graph_rrd.snmp_query_graph_id=
-bug#0000984: Poller does not correctly flush poller_output table after a memory error
-bug: ss_sql.php causes the script server to crash
-bug: Timeshifter added to base code.
-bug: Allow query_ and host_ substitution in COMMENT and CDEF's.
-bug: Command line interface scripts to add devices, graphs, tree's and permissions.
-bug: Correct index error when creating graphs when you have no hosts on your system.
-bug: More recent versions of net-snmp broke SNMP walk functions.
-bug: Adjust for problematic responses from some SNMP agents (IBM AIX).
-bug: Improve logging in cmd.php and poller.php when parameters are not specified correctly.
-bug: Reduce the total number of SQL queries called
-bug: Replace inefficient strip function in process_poller_output
-bug: Some php_snmp implementations return strings as "Hex-STRING:". In these cases properly resolve the string
-bug: Correctly assign right and left click actions for Opera
-feature: Paginate the Graph Creation Page
-feature: Add rra_path as a global.php config variable
-feature: Add drop down actions to data queries
-feature: Add drop down actions to data input methods
-feature: Add filtering and pagination to data queries
-feature: Add filtering and pagination to data input methods
-feature: Add filtering and pagination to host templates
-feature: Add filtering and pagination to user administration
-feature: Add Web Basic authentication
-feature: Add authentication realm to modifiable user parameters
-feature: Add multiple polling intervals
-feature: Moved command line scripts to cli sub directory
-feature: include/config.php now only includes database configuration
-feature: include/config_* have been renamed to include/global_*. Note: Script servers need to be updated.
-feature: Allow VRULE's in Cacti to specify an absolute timestamp in addition to [+/-]HH:MM
-feature: Add 1 minute RRA and graph templates
-feature: Add item select highlighting to main pages
-feature: Let poller.php be more intelligent about poller intervals less than 60 seconds
-feature: Add consistency to Filters by adding nowrap to td items
-feature: Add Graph and Data Source counts to Device page
-feature: Add Poller Interval to Data Sources page
-feature: Keep filters aligned with main page content on window resize
-compat: Add additional checking due to php-snmp changes in Windows

[cigamit]

And here is the Plugin Architecture to go with this version.

[fmangeant]

Hi Tony

using SVN 4053 (Cacti and cactid), I had some errors every now and then :

Code: Select all

08/02/2007 07:55:07 AM - SYSTEM STATS: Time:5.1843 Method:cactid Processes:1 Threads:1 Hosts:3 HostsPerProcess:3 DataSources:15 RRDsProcessed:12
08/02/2007 08:00:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval!  The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 299 seconds have passed since the last poll!
08/02/2007 08:00:06 AM - SYSTEM STATS: Time:5.1851 Method:cactid Processes:1 Threads:1 Hosts:3 HostsPerProcess:3 DataSources:15 RRDsProcessed:12

Crontab entry runs every 5 minutes, and poller is set to 5 minutes also in Cacti.

I'm currently testing beta 2 with cmd.php, and will test later with cactid.

[fmangeant]

Same error with beta 2 and cmd.php :

Code: Select all

 08/02/2007 09:35:02 AM - SYSTEM STATS: Time:1.1589 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:13 RRDsProcessed:11
08/02/2007 09:35:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 299 seconds have passed since the last poll!
08/02/2007 09:30:03 AM - SYSTEM STATS: Time:1.1624 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:13 RRDsProcessed:11
08/02/2007 09:25:02 AM - SYSTEM STATS: Time:1.1554 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:13 RRDsProcessed:11
08/02/2007 09:25:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 296 seconds have passed since the last poll!
08/02/2007 09:20:07 AM - SYSTEM STATS: Time:1.1459 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:13 RRDsProcessed:11

[TheWitness]

FMangeant,

Hmm, you have drift in your time sync. I will slop up the measurements sometime today and well see if the error messages go away.

Larry

[TheWitness]

FMangent,

Look at Line 112. Change "5" to "7" and see if that does it. If so, let me know. It may simply be that the initialization of the script (that being the time it is forked from cron and the time $seconds is calculated) is high due either to server load of some other issue.

Larry

[fmangeant]

Hi Larry

this server runs a NTP client, its time seems to be OK :

Code: Select all

$ /usr/sbin/ntpdate -q 10.50.80.8
server 10.50.80.8, stratum 4, offset 0.013667, delay 0.02592
 2 Aug 13:31:48 ntpdate[11449]: adjust time server 10.50.80.8 offset 0.013667 sec

Load is... rather low

Code: Select all

$ uptime
 13:33:22 up 179 days, 12:31,  1 user,  load average: 0.00, 0.00, 0.00

I've modified line 112 of poller.php, let's see if that works.

[fmangeant]

Same error :

Code: Select all

08/02/2007 02:15:03 PM - SYSTEM STATS: Time:1.1491 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:13 RRDsProcessed:11
08/02/2007 02:20:01 PM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval!  The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 299 seconds have passed since the last poll!
08/02/2007 02:20:02 PM - SYSTEM STATS: Time:1.1489 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:13 RRDsProcessed:11

[gandalf]

Frederic, is this running under VM?
Reinhard

[TheWitness]

Roddie,

Edit the poller.php and change the following lines to this:

Code: Select all

//if (read_config_option('log_verbosity') >= POLLER_VERBOSITY_MEDIUM) {
	cacti_log("DEBUG: Poller Interval: '$poller_interval', Cron Interval: '$cron_interval', Max Runtime; '" . MAX_RUNTIME . "', Poller Runs: '$poller_runs'", TRUE, "POLLER");;
//}

This adds the MAX_RUNTIME to the equation and output's every run. Post your findings.

Larry

[fmangeant]

Frederic, is this running under VM?

Hi Reinhard

no, this test system is running on a Dell PowerEdge 750 (P4 2.8 GHz w/ 1 Gb RAM), under Gentoo Linux 32 bits.

[TheWitness]

Roddie,

Are you changing around your poller interval?

Larry

[dagonet]

And here is the Plugin Architecture to go with this version.

Hi community,
I have a simple question:
Where can I get the plugin arch files for *nix? I really do not want to convert all the files from Windows format to *nix format.

Maybe the dev team should decide how cacti is distributed, *nix or windows file format.

regards
Dagonet

[cigamit]

And here is the Plugin Architecture to go with this version.

Hi community,
I have a simple question:
Where can I get the plugin arch files for *nix? I really do not want to convert all the files from Windows format to *nix format.

Maybe the dev team should decide how cacti is distributed, *nix or windows file format.

regards
Dagonet

Um.... there is something for everyone in the zip. Patch for *nix and files for Windows because they don't have a "patch" program by default.

[TheWitness]

Ok,

If figured out the problem. However, now I have to go eat dinner and take the dog for a ride. You'll see it in SVN on Saturday.

Larry