Place Your Feature Requests & Bug Reports Here

torstentfk · Post by **torstentfk** » Wed Jul 11, 2007 7:55 am

Hi,

there is an error when I add a MacWatch: "Error: Save Failed: Field Input Error (Check Red Fields)". There is no red field and nothing is added to the db.
Next: I searched the forum but did not find any documentation about the watch and authorizations tool in mactrack. What can I do with the authentication of a mac-address? I assume that the watch tool emails a message if a mac changes the ports. If it is so how could I write an alert if a new mac is found (=a new computer was connected)

Torsten

Post by **TheWitness** » Wed Jul 11, 2007 10:01 am

This feature is not implemented yet.

TheWitness

torstentfk · Post by **torstentfk** » Wed Jul 11, 2007 10:14 am

TheWitness wrote:This feature is not implemented yet.

TheWitness

If it is not yet available which purpose have the 2 new options?

Torsten

Post by **TheWitness** » Wed Jul 11, 2007 2:30 pm

I simply ran out of time and did not get to finish the two features. I'll get back to in in the fourth quarter I hope. Otherwise, things should be pretty stable.

TheWitness

wardrobe · Post by **wardrobe** » Mon Jul 23, 2007 9:04 am

is it limited to 21 chars?

we have a 3com switch its system description is
3Com 3Com Switch 5500G-EI SFP 24-Port Software Version 3Com OS V3.01.00s168

when putting in anything over 21 chars it refuses to save

i have had to use
3Com 3Com Switch 550%

not a big problem for me but the limit doesn't really allow for different versions of 5500

Post by **TheWitness** » Mon Jul 23, 2007 7:04 pm

Use this instead

5500G-EI SFP

It looks for any part of the sysDescription. Does not have to be the entire thing.

TheWitness

wardrobe · Post by **wardrobe** » Tue Jul 24, 2007 3:16 am

awesome cheers for the tip!

and thanks for a great plugin, (we primarily setting up your pluggin to hunt down the next time someone comes along a plugs a dhcp server onto our network and this will help us track down the mac and so we can shut down the switch port.

marcosramos · Post by **marcosramos** » Thu Aug 23, 2007 10:01 am

Wake On Lan integration

I've found a php script that allows me to wake up remotely the machines (don't remember the name of the author) on the internet.

kuma3 · Post by **kuma3** » Tue Oct 02, 2007 1:28 pm

TheWitness,

Thanks for the great plugin! I got everything works beautifully except one, ignore ports.

I dig through this post, http://forums.cacti.net/viewtopic.php?p=87599 , that was mentioned on the first page of this thread, even tried the number from the snmpwalk suggestion, but still couldn't get it to ignore those ports.

I have Cisco equipments(2960 and 3560), using IOS scan as scanner. I tried all 'Gi0/1', 'GigabigEthernet0/1' and the number from snmp walk, nothing seems to do it. Could you spare a moment and point me a direction where I can continue troubleshooting?

Thanks,
Mark

helper4cacti · Post by **helper4cacti** » Fri Oct 05, 2007 2:25 pm

Hi
Here is my version - Device Tracking (mactrack - v1.0)
I have empty Switch name and Vendor name fields in MAC/IP report
and in mac_track_ports table are empty also...

- and one more
Ports to Ignore in Device form does't work as you can see port Fa0/7 at my attachment has some mac addresses.

What can I do to fix it ?

adrianmarsh · Post by **adrianmarsh** » Tue Oct 30, 2007 7:34 pm

Adding a bug for the paging if its not already here:

http://forums.cacti.net/viewtopic.php?t=23984

kapa · Post by **kapa** » Mon Nov 05, 2007 11:46 am

Larry, first I want to thank you for the great plugin!

Here are some features that will be very useful for me (about much of them I've read in this or adjacent topics):

1. The ability to delete MAC from the Report View.
Sometimes I make a mistakes in ignore ports and then I must delete the device to delete all useless MACs. Besides sometimes I receive duplicate entries - one with IP and another - without IP. If I can delete entries by hand - it will be much easier.

2. The ability to chose what to authorize - MAC, MAC-IP or IP-MAC-Port.
It's due to those duplicate entries. Or you just can add the ability to alarm only when all 3 components of IP-Mac-Port presents in rogue device entry.

3. The ability to add one device (Router) to several sites.
I have several quarters (sites) plug in to the one router. And I must include this router into all of these sites.

4. In View mode put MAC, port etc...in normal order. Such as 1,2,3,...10,11...

kapa · Post by **kapa** » Sat Nov 10, 2007 9:22 am

kapa wrote: ........
4. In View mode put MAC, port etc...in normal order. Such as 1,2,3,...10,11...

I've made some changes in mactrack_veiw.php and now it sorts ip_address, port_number, vlan_id in numerical form.

llow · Post by **llow** » Wed Dec 05, 2007 11:13 pm

I'm looking to do some rewrite of the code when I have a chance. Anything in the works currently to better integrate into Cacti.

For example:

1) Get rid of extra devices table, add devices from cacti to the "site".
2) Link device_types directly to host templates.
3) SNMPv3 support

All 3 seem easy to do but probably will require a large amount of the code to change. Let me know what you think.

NOTE: Btw line 329 in the current release has a typo in the select statement.

streaker69 · Post by **streaker69** » Tue Jan 22, 2008 9:55 am

Just a simple request for the future versions:

mac_track_device_types.sysDescr_match

Should be a little larger than 20 characters. I'm seeing more and more devices that have a sysDescr that's rather large. I've increased mine up to 80 to take into account for some of my devices.

I'm assuming that you put the % wildcard in there to maybe compensate for larger descriptions, but I've never seen the wildcard work. Whenever I have used it, I've always seen those devices as Error.

Cacti

Place Your Feature Requests & Bug Reports Here

device type field length

ignore ports question

Sorry. I probably post in wrong place...

Who is online