Dual Links between hosts

Support questions about the Network Weather Map plugin

Moderators: Developers, Moderators

Post Reply
cksrealm
Cacti User
Posts: 140
Joined: Sun May 08, 2005 5:45 pm
Location: Sydney,Australia
Contact:

Dual Links between hosts

Post by cksrealm »

All , we have some hosts which have a dual connection into another host, is there a way to specify the direction of the links so that I can show both links side by side, currenlty if I add a second link between hosts it just puts the link over the top of the first one, hope this makes sense :-)
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Post by Howie »

Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Livio Zanol
Posts: 37
Joined: Thu Feb 23, 2006 5:59 pm

Post by Livio Zanol »

Use the VIA state... have a look at the config reference at the manual page... Like Howie saids, RTFM.
StarLog
Cacti User
Posts: 150
Joined: Sat Jun 02, 2007 3:57 pm

Post by StarLog »

Then they would look like this:


Image
Cacti v0.8.8a
Weathermap 9.7a
--------------------
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Post by Howie »

That's why I just linked to the article (not the manual). There are a few ways to do this, depending on the effect you want - straight, curved, or just one link that is the sum of several.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest