Why there is non photos

[springage]

I have installed Cacti in Windows There is no graph
I have installed Cacti in Linux on another computer, there is no graph,too.

[springage]

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="nr0u0204 - Traffic - 10.92.80.234 (bge0)" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
DEF:a="/home/w4adm/cacti/rra/nr0u0204_traffic_in_17.rrd":traffic_in:AVERAGE \
DEF:b="/home/w4adm/cacti/rra/nr0u0204_traffic_in_17.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s"

RRDTool Says:

/usr/bin/rrdtool: relocation error: /opt/lampp/lib/libgd.so.2: undefined symbol: jpeg_destroy

[springage]

libgdbm.so.2 => /opt/lampp/lib/libgdbm.so.2
libgdbm.so.2.sav
It works
But why?

[Taiphun]

What does

Code: Select all

# ldd /usr/bin/rrdtool

return?

[springage]

w4adm@athenes:/opt/lampp/bin$ ldd /usr/bin/rrdtool
librrd.so.0 => /usr/lib/librrd.so.0 (0x40026000)
libm.so.6 => /lib/libm.so.6 (0x40042000)
libc.so.6 => /lib/libc.so.6 (0x40065000)
libgd.so.2 => /usr/lib/libgd.so.2 (0x40198000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0x401e7000)
libz.so.1 => /usr/lib/libz.so.1 (0x4020c000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
libpthread.so.0 => /lib/libpthread.so.0 (0x4021e000)
libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0x4026f000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x4028e000)

[springage]

What does

Code: Select all

# ldd /usr/bin/rrdtool

return?

w4adm@athenes:/opt/lampp/bin$ ldd /usr/bin/rrdtool
librrd.so.0 => /usr/lib/librrd.so.0 (0x40026000)
libm.so.6 => /lib/libm.so.6 (0x40042000)
libc.so.6 => /lib/libc.so.6 (0x40065000)
libgd.so.2 => /usr/lib/libgd.so.2 (0x40198000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0x401e7000)
libz.so.1 => /usr/lib/libz.so.1 (0x4020c000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
libpthread.so.0 => /lib/libpthread.so.0 (0x4021e000)
libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0x4026f000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x4028e000)

[TheWitness]

You have likely installed an RPM version of RRDtool that is using the old Sun standard install paths. Better to uninstall that package and build from source. Or, if you have compiled it yourself, use the following configure option:

./configure --prefix=/usr

or

./configure --prefix=/usr/local

Then, rrdtool will be installed properly into /usr/bin and likely you will not encounter these shared library issues.

TheWitness