graphs with regular holes/gaps [solved]

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
slindemann
Posts: 2
Joined: Thu May 31, 2007 6:06 am

graphs with regular holes/gaps [solved]

Post by slindemann »

Hi,

I have a graph taken from an traffic generating virtuel routning instance. The vendor description of the interface as a 64-bit counter, so my data queries is based on the rrd "COUNTER".

Now I get the attached graphs.

My own suggestion is that this internal counter is only updated every 15 min, but is it correct?
Could anybody maybe give me a clue where to look for the problem.

There is no error in log files, and the cacti verion is 0.8.6j with patches, rrdtool is version 1.2.11.

Best regards,

slindemann
Attachments
example of the gaps
example of the gaps
day.JPG (27.78 KiB) Viewed 975 times
zoom in on the gaps
zoom in on the gaps
day_zoom.JPG (26.91 KiB) Viewed 975 times
Last edited by slindemann on Fri Jun 01, 2007 3:13 am, edited 1 time in total.
Top
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:
Contact gandalf

Post by gandalf »

Please run several times in DEBUG mode to get the numbers into cact.log. Then you will see if your assumption is correct
Reinhard
Top
slindemann
Posts: 2
Joined: Thu May 31, 2007 6:06 am

cofirmed by the vendor

Post by slindemann »

My vendor confirmed that this counters only get updated every 15 min, so that is the explaination for this graph.

I should have done my homework :oops: but it could help other with similar problems.
Top
Post Reply

Return to “Help: General”

Who is online

Users browsing this forum: No registered users and 2 guests