Cacti

Hey mikaelf, I also tried to get support form HP but all I got as answer was that getting performance via WMI isn't currently supportet by HP! and never will be supported, so they wont do anything for you ... In my case the gaps in the graphs are very small (i dont even see them when going into half...

Symptom is that I have to restart the WMI service once every hour. Everytime I've restarted the WMI service, the wmic client stops getting data after an hour. Hey mikaelf, I think the problem of having to restart the service every hour is on quite every system running the eva monitoring. I createt ...

what kind of error message did you get ?

which instance of cacti isn't working ??

you need to : 1. export your mysql Database (e.g. with phpmyadmin) 2. COPY your cacti Folder (e.g. /usr/share/cacti/) to the new system 3. Install Mysql, Apache2 and everything else Cacti needs on the new sys 4. import the existing DB 5. check all rights, accounts @ mysql etc. 6. create a cronjob (e...

The OID is the "Logical Drive Performance Monitor Entry" of an HP Proliant DL380G5. if this helps: Here's what the snmpwalk says: srvcacti:/var/log/cacti# snmpwalk -v 2c -c public ***.***.***.*** .1.3.6.1.4.1.232.3.2.8.1.1.7.2.1.1 SNMPv2-SMI::enterprises.232.3.2.8.1.1.7.2.1.1 = INTEGER: 17...

I know that 10M equals 10 millions but the data is wrong !

when I snmpwalk on the machine + OID it gets me something like 300 - 500

when I look into the Cacti logfile for the RRD there's the right data but with a timestamp in front.

(timestamp:512)

Hi Guys, I have a cacti server with 0.87g and just created a graph to monitor the IO's of a direct attached Diskshelf of a HP Proliant server. Cacti writes the rrd file, the content of the rrd is just fine. rrd_version = "0003" step = 300 last_update = 1292923350 ds[commands].type = "...

Hi there, I've just created a template to monitor the Fibre Channel Statistics of a Bluearc Titan 2100. Now I have the problem, that the Titan presents the "Interface Status" as numbers : unknown(0) - the information could not be obtained. enabled(1) - the interface is enabled. disabled(2)...

I dont know.
If i would know I would tell you ... Luckily I took a snapshot of my VM before installing ...

ok thanks a lot found it and now it works ...

And how could I tell cacti to use that "multi index" with OID/REGEXP ?
Could you get me a link to the documentation on that ?

OK now I know what's the Problem ... The Bluearc has some kind of double index (sorry never done this before) It says .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1. 7 (for fcStatsInstantIn) . 1 (for Clusternode 1) . 2 (for fc Card #2) But Cacti scans .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.7.2 without having the ...

Hey Guys, I just created a Data Query named "HBA" for a Bluearc Titan NAS system. I wanted to get the FibreChannel Statistics out of the machine. My Problem is when I create a Graph for the Device I have lots of this in my log files : 11/02/2010 12:34:20 PM - POLLER: Poller[0] CACTI2RRD: /...

Hi Guys, I updated my Cacti installation from 0.8.7e to 0.8.7g PIA is also updatet from 2.6 to 2.8 Now I see that my poller doesnt run anymore Here's what the Log said : 09/13/2010 11:53:46 AM - CMDPHP: Poller[0] ERROR: SQL Assoc Failed!, Error:'0', SQL:"select poller_output.output, poller_outp...

Ok for everyone who has problems with a crashing Wmi service, here's a little howto: There are 4 reasons why your cacti doesnt graph or doesnt even get some data from the command view host: Reason One: wmic command gets you this : ERROR: Retrieve result data. NTSTATUS: NT code 0xc0001010 - NT code 0...