Cacti

Moving the RRA's to RAM-disk made some difference :P Runtime now: 09/03/2009 03:25:15 PM - SYSTEM STATS: Time:14.5538 Method:spine Processes:8 Threads:20 Hosts:160 HostsPerProcess:20 DataSources:8741 RRDsProcessed:4142 Tossed the old server, stole a new one with more CPU's (2x DualCore Xeon) and all...

I fail at google - this is an old issue with RRDTool:
http://net.doit.wisc.edu/~dwcarder/rrdcache/
Ok - so boost, new disks, new OS (x64) and more RAM is the way to go. Or perhaps try to get RRD 1.2.23 installed first.

I just switched to spine for (one of) my Cacti installation, hoping to get better runtime. With cmd.php: 07/30/2009 04:16:53 AM - SYSTEM STATS: Time:111.8731 Method:cmd.php Processes:10 Threads:N/A Hosts:161 HostsPerProcess:17 DataSources:8753 RRDsProcessed:4134 After som tuning and debugging (buggy...

I had the same problem - from command-line the script worked, but NaN in Cacti. I added "tcl" (e.g. "tcl <path to cacti>/scripts/...") in the beginning of the field "input string" at Data input method -> Cisco - Dot11 Client Rate Distrubution.

Hi! got the same (?) error - Fresh install of 0.8.7d, applied official patches, and then trying to install PIA: /usr/share/cacti$ patch -p1 -N -F3 < cacti-plugin-0.8.7d-PA-v2.4.diff patching file auth_changepassword.php patching file auth_login.php patching file data_sources.php patching file graph_...

This is more like what I wanted to get - information on all DSP channels in one graph. To bad I had to make a nasty shell-script . . . :/

The bugID is CSCeg55420 - not very informative, but still a bugID

I finally got a reply from Cisco TAC (and bumping myself yet again :roll: ): There seems to be a bug in IOS prior to 124-5 that causes SNMP to report wrong data. I haven't tested this myself by upgrading one of the gateways I'm having trouble with, but I'll get back to you as soon as I have confirme...

Hmkai. Finally I managed to graph my precious DSP channels. Anyone interested in templates, give me a PM.

Testing against another gateway with ipvoicek9-mz.124-15.T4 (the hardware is more or less the same), I get correct values: VG1#sh voice dsp active DSP DSP DSPWARE CURR BOOT PAK TX/RX TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT ==== === == ======== ========== ===== ====...

I'm stuck trying to graph DSP channel usage. Other VoIP templates like "VoIP Channels in Use on Cisco AS5300 and like Access Routers" counts the serial / isdn channels in use, not the DSP channels. What I am after is graphing of something similar to the "show voice dsp active" - ...

Still NaN.

root@server:/usr/share/cacti# snmpwalk -v 2c -c public localhost .1.3.6.1.4.11.2021.11 UCD-SNMP-MIB::ssIndex.0 = INTEGER: 1 UCD-SNMP-MIB::ssErrorName.0 = STRING: systemStats UCD-SNMP-MIB::ssSwapIn.0 = INTEGER: 0 UCD-SNMP-MIB::ssSwapOut.0 = INTEGER: 0 UCD-SNMP-MIB::ssIOSent.0 = INTEGER: 1 UCD-SNMP-M...

Sure: root@server:/etc/snmp# nano snmpd.conf root@server:/etc/snmp# /etc/init.d/snmpd restart Restarting network management services: snmpd. root@server:/etc/snmp# # snmpget -v 1 -c public localhost .1.3.6.1.2.1.25.3.3.1.2 root@server:/etc/snmp# snmpget -v 2c -c public localhost .1.3.6.1.2.1.25.3.3....