Cacti

dhd81 wrote:Hi,

Where I can find good and updated documentation showing each steps how to install cacti because i followed cacti doxumentation and getting errors running cacti.

Please assist.

Thanks
dhd

Please see BSOD2600's updated documentation:

http://bsod2600.home.comcast.net/install_windows.html

guerra6880 wrote:
Great template ... Have you tried this on high speed connections (10 Mb, 100 Mb, Gig etc.. )

I setup this up today and its working fine for my serial connections but the higher speeds are just getting 'NaN%'
Thanks.

Nevermind -- I reapplied the template and it worked back fine.

After select interface you will see a page that shows inbound and outbound speed. Enter correct values. Or, go to data sources of this graph and write down correct speed. I think in this graph you leaved speed as 100.000.000 but it must be 120.000 Then you will see correct values.. Great template ....

Well... Those interfaces are the uplink interfaces to a set of 3 stackables. One of the interfaces runs into my core and is the Spanning-Tree Root for the other 2 stackables. Over 50 devices are connected to it, they are all actively transfering. There are clinical servers that run on it. Lastly th...

ariela wrote:Error: XML: Hash version does not exist.


what I've to do?
0.8.6b

Regards
Andrea

Upgrade to 086c as this template was created for that.

If cacti could cope with daylight savings that would be nice, not a very important feature as it only happens twice a year. I've seen people using mrtg having solved this issue, although I have no idea exactly how they did that... This was problem for us in the US as well, so we just set that one s...

I had to restart my server today it took almost 2 hrs (to recache everything (~180 hosts).

Any help or suggestions on how to prevent/change the method would be appreciated as my boss is just about ready to take my head off.

Thanks!

Basilio Cat wrote:2600+ interfaces are being graphed, using cactid. 45 seconds of run time, 5 threads. CPU load is about 5-6%
Cactid is great!

800 sources, 209 Hosts, 10 processes, CPU ~80% & mean time of 150 secs.

CMD Mode

I am having an interesting problem with a Win32 Servers and querying for the interface Description. In the Device page I get the following when issuing a verbose query. + Located input field 'ifDescr' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.2' + Found item [ifDescr='HEX-00:4D:53:...

Hi, I get this error everytime poller.php launches. I just ignore it as it does not interfere in any way graphs are being made in cacti. I don't know why that happens. I went to the paths specified and saw some empty directories. I did not delete anything since there is no effect because of these e...

When I graph the connections I don't get any input on my graphs. I do get the CPU Usage and Interfaces but no Connections or Memory. Polling a couple of Pix's running on Cisco PIX Firewall Version 6.3(1) I used to have this problem and it was driving me nuts until I figured out that the maximum val...

guerra6880, Do you know if this feature documented in any way? I tried to create a custom graph in cacti with the 64-bit counters, but it didn't work too well... I'd love to see a howto on this topic :) -Thomas I don't know if there is any documentation but you should not have to do anything terrib...

raX wrote:You called it . The error has been corrected.

-Ian

Thanks guys. Working like a champ now.

[quote="adrian"
is there a Limitation to Cacti for displaying above 100 meg peaks? [/quote]

This is not a limitation within Cacti but with 32-bit SNMP v1 counters. Try using the 64-bit SNMP v2 counter and that should take care of this problem.

As the subject states .... Here is the url http://www.cacti.net/downloads/cactid/packages/Windows/cacti-cactid-0.8.6a.zip Access forbidden! You don't have permission to access the requested object. It is either read-protected or not readable by the server. If you think this is a server error, please...