Ruby.

J-D B, If HSTB is your priority, then do an update at 16.5 minutes past an hour. That should go again 2 minutes later. If none come, try a further 2 minutes later. That will be 4 updates to include possible resends.

Do the same at 46.5 minutes past the hour and repeat every 30 minutes. You should fill up your cache with HSTB very quickly, especially if you set your device profile to only ask for HSTB and increase your cache to, say, 9 days if your machine runs 24/7 (or a proportion of 9 if less than 24/7).

Mike

J-D B

It has worked for me and for others. There must be a problem with your settings.

On the Device profiles page, uncheck all available projects except Help Stop TB, under Project Limits set Help Stop TB to Unlimited and under Workunit Cache Settings, set Cache to 9.

Then use the timings I have mentioned before.

Once you have sufficient HSTB, then you can re-check other projects.

HSTB appears to be a low priority project, which is why you need to turn everything else off temporarily.

Mike

smeyer Judging from your results, you would make it within 3 months. HSTB has been showing 100% for 6 weeks now and the techs have indicated that is a false figure, so you could well make it. Mike

smeyer55
Judging by the statements made, you could well have enough time, but we can't be sure. You have a lot of cores running and a lot of targets. Do you have a spreadsheet to control them?
Mike