Index | Recent Threads | Unanswered Threads | Who's Active | Guidelines | Search |
![]() |
World Community Grid Forums
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
No member browsing this thread |
Thread Status: Active Total posts in this thread: 4
|
![]() |
Author |
|
Mamajuanauk
Master Cruncher United Kingdom Joined: Dec 15, 2012 Post Count: 1900 Status: Offline Project Badges: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Simple question - or is it?
----------------------------------------Which is best? Thermal paste can be applied thinner but is difficult to get even Thermal pads are usually 1mm and even Which is best? I ask as I'm seeing some CPU cores within the same CPU showing significant differences in temperature... Thanks in advance
Mamajuanauk is the Name! Crunching is the Game!
![]() ![]() |
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Thermal paste is hard to beat if you apply it right. Here's a video that shows which way is best: applying cpu paste
----------------------------------------As for the difference in cpu core temps, this can happen on older cpu's that have internal cooler paste underneath the heatshield that has gotten old. Or newer cpu's where the internal paste wasn't applied correctly in the factory. On some cpu's the heatshield can be removed - a diy razorblade job - so that the original paste can be replaced. If the temp difference between cores is 10 degrees or less I wouldn't worry too much about though. But if you must, here's how: Haswell and Ivy Bridgy heatshield removal Edit: changed the video [Edit 2 times, last edit by Former Member at Jul 6, 2014 11:12:32 AM] |
||
|
Mamajuanauk
Master Cruncher United Kingdom Joined: Dec 15, 2012 Post Count: 1900 Status: Offline Project Badges: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Thank sneezed, I use the spread method and always do self build so all paste is new at the time of build...
----------------------------------------The temp difference I'd lass that 10 degrees, as you say, I will not worry about it... Many thanks
Mamajuanauk is the Name! Crunching is the Game!
![]() ![]() |
||
|
yoro42
Ace Cruncher United States Joined: Feb 19, 2011 Post Count: 8979 Status: Offline Project Badges: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Good info. thx
----------------------------------------![]() |
||
|
|
![]() |