Index  | Recent Threads  | Unanswered Threads  | Who's Active  | Guidelines  | Search
 

Quick Go ยป
No member browsing this thread
Thread Status: Active
Total posts in this thread: 3
[ Jump to Last Post ]
Post new Thread
Author
Previous Thread This topic has been viewed 1543 times and has 2 replies Next Thread
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Error on DDT Phase2 w/units dated 10/04/11

HAve three units showing on my results status with error messages, sent on 10/04/11, trivial credits on each. See error message below:
dg03_ d113_ ps0000_ 4-- 640 Error 10/04/11 21:12:11 11/04/11 00:02:00 0.28 4.4 / 4.4
dg03_ d113_ ps0000_ 3-- 640 Error 10/04/11 13:36:24 10/04/11 21:12:02 0.25 6.1 / 6.1
dg03_ d113_ ps0000_ 2-- 640 Error 10/04/11 12:28:28 10/04/11 12:56:59 0.21 4.7 / 4.7
dg03_ d113_ ps0000_ 1-- 640 Error 10/04/11 06:47:53 10/04/11 12:28:17 0.29 7.0 / 7.0
dg03_ d113_ ps0000_ 0-- 640 Error 10/04/11 06:47:44 11/04/11 04:24:30 0.26 4.5 / 4.5

and

dg04_ c397_ ps0000_ 4-- 640 Error 10/04/11 16:14:04 10/04/11 19:00:12 0.62 17.3 / 17.3
dg04_ c397_ ps0000_ 3-- 640 Server Aborted 10/04/11 13:31:05 10/04/11 19:30:11 0.00 0.0 / 0.0
dg04_ c397_ ps0000_ 2-- 640 Error 10/04/11 08:45:05 10/04/11 16:13:44 0.80 17.8 / 17.8
dg04_ c397_ ps0000_ 1-- 640 Error 10/04/11 08:14:01 10/04/11 08:42:11 0.44 16.2 / 16.2
dg04_ c397_ ps0000_ 0-- 640 Error 10/04/11 08:13:35 10/04/11 12:36:56 0.33 7.1 / 7.1

any help please
[Jul 5, 2011 1:09:03 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: Error on DDT Phase2 w/units dated 10/04/11

hi,

Rather old indeed and just below your post there's this thread, discussing and explaining, that some batches were bad and put on hold due a too-high error rate.

http://www.worldcommunitygrid.org/forums/wcg/viewthread_thread,31329

From reading in back-room I'm deriving, that if the current General Beta is concluded, there might be a resume of this project, but as the schedule has fallen behind, not today or tomorrow, nor next week. Think the largest part of the last DDDT2 run has been cleared sometime last week. The plate is full, so please give it time.

Thanks for crunching at WCG

--//--
[Jul 5, 2011 4:40:49 PM]   Link   Report threatening or abusive post: please login first  Go to top 
JSYKES
Senior Cruncher
Joined: Apr 28, 2007
Post Count: 204
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Error on DDT Phase2 w/units dated 10/04/11

This thread prompted me to look back - I recalled a few problems with WU's in April but was rather surprised to see that over two days (10/11 April) I had only had 2 WU's complete successfully and validate, with another 5 error out - with all four other instances running to error and the final (fifth) instance being server aborted.... Since then, nothing seen at all!! Having said that, with errors accumulating at that rate the system has a serious problem....so maybe it was time to slow things down a bit and work out what was going wrong.....hopefully the next batch will all then run successfully.
----------------------------------------

[Jul 5, 2011 10:09:42 PM]   Link   Report threatening or abusive post: please login first  Go to top 
[ Jump to Last Post ]
Post new Thread