Index | Recent Threads | Unanswered Threads | Who's Active | Guidelines | Search |
World Community Grid Forums
Category: Retired Forums Forum: Member-to-Member Support [Read Only] Thread: Windows Server 2003 |
No member browsing this thread |
Thread Status: Active Total posts in this thread: 2
|
Author |
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
My WCG client is Paused all of the time. It's running on a 450Mhz computer with Server 2003, It is also an America's Army server but I thought I would just help out with WCG with my little power I can't figure out what's wrong with it, can WCG run on Server 2003? Any help is appreciated.
|
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
the_heretic
Since I do not have direct experience with servers, I did some searching on Windows Server 2003 and only came up with one thread in the forums that indicated WCG was running on this platform. In the thread (which can be seen at http://www.worldcommunitygrid.org/forums/wcg/viewthread?thread=691), the member is addressing a problem with the length of time that a work unit running on Windows Server 2003. I would deduce from this that the WCG software should run on Windows Server 2003. As for the "Agent Paused" issue, much has been written about this in the forums and much of this has been digested in the Help facility available through the button at the on the selection bar above. Using the Help facility, you will be directed to this page http://www.worldcommunitygrid.org/cause.html which discusses possible causes. I would pay particular attention to the system requirements as it would appear that you are running on a fairly old system. |
||
|
|