| Index | Recent Threads | Unanswered Threads | Who's Active | Guidelines | Search |
 |
World Community Grid Forums
Category: Support
Forum: Website Support
Thread: Too Late |
| No member browsing this thread |
|
Thread Status: Active Total posts in this thread: 6
|
|
| Author |
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
On the Results Status page I had a couple of Beta work units with a status of "Too Late" this morning. Wanting to see if there were more, I set the Results Status Filter to Too Late. The other two parameters were left at All. I clicked on Filter, and nothing came up.
From my point of view, this is the most minor of problems. But I just wanted to let you know, so that it can get put on someones's To Do list. |
||
|
|
JmBoullier
Former Community Advisor Normandy - France Joined: Jan 26, 2007 Post Count: 3716 Status: Offline Project Badges: 
|
Have you checked that they have not changed to "Valid" or "Pending validation" since this morning? "Too late" is usually not very important for beta WUs, in particular because their estimated deadline is often not very realistic, as you could see for yours.
---------------------------------------- Cheers. Jean. |
||
|
|
mikefinn
Cruncher USA Joined: Apr 27, 2007 Post Count: 43 Status: Offline Project Badges: 
|
Have you checked that they have not changed to "Valid" or "Pending validation" since this morning? "Too late" is usually not very important for beta WUs, in particular because their estimated deadline is often not very realistic, as you could see for yours. Cheers. Jean. I have the same issue as the original poster. When I look at my results status with everything set to all, I see my Beta work unit in the list with status 'too late'. So, I decided to use 'too late' in the status filter box with everything else set to all, and the 'too late' Beta work unit was not displayed. As a test, I then reset everything to all, and noted the Beta work unit was still there as 'too late'. As a test, I then did a new filter having device and result status set to all, but project name set to Beta Testing, and my 'too late' Beta work unit was displayed along with my valid Beta unit. For some reason, my 'too late' Beta work unit will not be displayed when I try to filter my results status by using the 'too late' in the result status drop down block. As one last test, I repeated the filter using all for devices and status and using project name Beta Testing and made sure my too late beta wrok unit was displayed along with my other valid unit. I then changed just one of the filters; I changed result status from all to just 'too late', applied this filter, and the too late work unit that had just been displayed was gone from the display. |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
JmBoullier - As of this morning one of the two "Too Late" work units has changed to Valid. The other is still "Too Late."
The original problem remains. An attempt to filter on status of "Too Late" comes up empty. Thanks to mikefinn for his additional testing and clarification. |
||
|
|
JmBoullier
Former Community Advisor Normandy - France Joined: Jan 26, 2007 Post Count: 3716 Status: Offline Project Badges:
|
OK, there is obviously a real problem with this filter value.
----------------------------------------I have passed it to the techs for their attention. Thank you for reporting it and for the first debugging steps. Cheers. Jean. |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Thanks for reporting this. It looks like there might have been an error in the logic there. Hope to have it fixed soon.
|
||
|
|
|