Index  | Recent Threads  | Unanswered Threads  | Who's Active  | Guidelines  | Search
 

Quick Go »
No member browsing this thread
Thread Status: Active
Total posts in this thread: 6
[ Jump to Last Post ]
Post new Thread
Author
Previous Thread This topic has been viewed 1450 times and has 5 replies Next Thread
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Questions: Hardware-point discribency

Okay, I just signed up about 20 minutes ago, and my computer is already working on something; that's great. But when I referred to my device information, one thing bugs me: In the processor column, the benchmark is a 1.5 Ghz P4, at 100 points. However, I am using a P4 3.0 Ghz processor, which has been overclocked to 3.5 Ghz, that is being reported only as 3.2 Ghz; it also is only given 100 points, like the benchmark. Shouldn't a processor with hyperthreading at twice the clockspeed receive more points than the baseline? (It is actively using only roughly 50% of 3.5 ghz, which brings it to fully 1.7 ghz of pure computing power, still over the benchamark.)

Another question is storage. How on earth do I configure which hard drives stores the data? I currently have 3 hard drives, one of which is the system bootable(40 Gb), one for storage(200gb), and one workhorse (120Gb). However, the program only reports me as having a puny 0.98 gb of storage. I have tried configuring my device to work with the maximum on the webpage, 10 gb, but there's still no change. I also would like to know how, if there's a way, to select the hard drive used, because my system drive is rather chock full and in desperate need of pagefile space, but others are immensely empty (althought they run at lower rpm's - 10krpm for the system, 7.2 krpm industry standard for the rest)

Network: The comparison device is basically a intel 100mbps network adapter, if I'm correct. My computer, however, is running on both a 56 mbps wireless and a dual 1000 mbps gigabit ethernet. Both are active and connected to different gateways. However, the program is only using the slower but more robust wireless connection. How do I select which internet connection the program uses, and is this meter suppossed to sit around at 100 constantly as well?

Memory:
It states memory space, but not memory type. How does the scoring compensate for using more powerful DDR2 or RDRAM instead of conventional DDR/SDRAM?

Lastly, how do I maximise the potential of my computer for this cause? Is there any application for a powerful GPU such as an Nvidia GeForce 6800GT? I know that using practically all the system resources (of which I have plenty) for this workload will reduce my active performance to heck, but my computer is on for practically 24/7, and I do not use it for the 10 hours I am asleep.
[Dec 31, 2004 5:16:33 AM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
cool Re: Questions: Hardware-point discribency

I think that most of your questions are answered on the Points System page at http://www.worldcommunitygrid.org/join_now/points_system.html

The Rosetta program is computationally intensive but does not require much disk space. It can fit into 50 MB so any more space simply authorizes the World Community Grid to use more if a new project requires more. It will be a while before the diagnostic program gives a good idea of your CPU rating. I do not know why the first rating is always far off.

Here is a post that I made for a new member several days ago:
http://www.worldcommunitygrid.org/forums/wcg/viewthread?thread=1144#5352

Welcome,
Lawrence
[Dec 31, 2004 5:43:55 AM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: Questions: Hardware-point discribency

Hello Orca
Welcome to the Forum
and Great questions!
Okay, I just signed up about 20 minutes ago, and my computer is already working on something; that's great. But when I referred to my device information, one thing bugs me: In the processor column, the benchmark is a 1.5 Ghz P4, at 100 points. However, I am using a P4 3.0 Ghz processor, which has been overclocked to 3.5 Ghz, that is being reported only as 3.2 Ghz; it also is only given 100 points, like the benchmark. Shouldn't a processor with hyperthreading at twice the clockspeed receive more points than the baseline? (It is actively using only roughly 50% of 3.5 ghz, which brings it to fully 1.7 ghz of pure computing power, still over the benchamark.)

The Device will show the right information after it returns a result.
From what I have read, if your hyperthreading your actually
doing 100% If it says 50.

Another question is storage. How on earth do I configure which hard drives stores the data? I currently have 3 hard drives, one of which is the system bootable(40 Gb), one for storage(200gb), and one workhorse (120Gb). However, the program only reports me as having a puny 0.98 gb of storage. I have tried configuring my device to work with the maximum on the webpage, 10 gb, but there's still no change. I also would like to know how, if there's a way, to select the hard drive used, because my system drive is rather chock full and in desperate need of pagefile space, but others are immensely empty (althought they run at lower rpm's - 10krpm for the system, 7.2 krpm industry standard for the rest)
Once again The Device will show the right information after it returns a result.
I'm sure I have seen a post that explained how to move/resize the swap file or
use one on anohter drive.

Network: The comparison device is basically a intel 100mbps network adapter, if I'm correct. My computer, however, is running on both a 56 mbps wireless and a dual 1000 mbps gigabit ethernet. Both are active and connected to different gateways. However, the program is only using the slower but more robust wireless connection. How do I select which internet connection the program uses, and is this meter suppossed to sit around at 100 constantly as well?

Mine all still read 100 :(

Memory:
It states memory space, but not memory type. How does the scoring compensate for using more powerful DDR2 or RDRAM instead of conventional DDR/SDRAM?
It only scores by amount of
ram unless it factors during the resut benchmarks?

Lastly, how do I maximise the potential of my computer for this cause? Is there any application for a powerful GPU such as an Nvidia GeForce 6800GT? I know that using practically all the system resources (of which I have plenty) for this workload will reduce my active performance to heck, but my computer is on for practically 24/7, and I do not use it for the 10 hours I am asleep.
Wow 10 hrs sleep.... sleep
This one is easy.
If possible Don't run a screen saver.
Use as few system resources as you can.
And as your doing leave it on as much as possible.

Good good luck
And Keep On Crunch'n
Robert
----------------------------------------
[Edit 1 times, last edit by Former Member at Dec 31, 2004 7:29:48 AM]
[Dec 31, 2004 7:26:17 AM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: Questions: Hardware-point discribency

bump up...
I'd just kind of like to re-ask the original poster's question regarding how one goes about telling the program which network connection to use...
----------------------------------------
[Edit 1 times, last edit by Former Member at Dec 31, 2004 8:40:35 AM]
[Dec 31, 2004 8:39:40 AM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
sleep

Hey Welcome to the WCG to you also zeal07

Time for sleep then work=@10hrs I'll be back to see if the Blanks are all filled in...
Robert
sleep
[Dec 31, 2004 9:36:18 AM]   Link   Report threatening or abusive post: please login first  Go to top 
joatmon
Senior Cruncher
Joined: Nov 17, 2004
Post Count: 185
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Questions: Hardware-point discribency

bump up...
I'd just kind of like to re-ask the original poster's question regarding how one goes about telling the program which network connection to use...


I remember reading a post by a WCG staff member (but can't find it now) that said that the WCG agent uses the first available network connection, but that it is not user selectable/configurable.
[Dec 31, 2004 1:38:39 PM]   Link   Report threatening or abusive post: please login first  Go to top 
[ Jump to Last Post ]
Post new Thread